HPE MSA 2060 SAS - Cannot create a Pool

[cing]

Hello,

I have unboxed my MSA 2060 SAS, with 18 SSD (installed by HP). All the disk are identical.

I started the web page to configure it, The first step is done.

Currently, I'm blocked on the Step 2 (Storage), creation of the pool.

I can see all my disk in the "Available Disks", but if I'm clicking to select the Raid type, and select the disks on the web page.

The "Add Disk Group" bouton is not enable.

I tried to select all the disks or a part of disk and the result is always the same.

FYI I have 2 controlers, and the both are started.

Somebody had this same issue ?

Thanks in advance for your assistance.

[support_s]

System recommended content:

1. HPE MSA 1050 2050 2052 1060 2060 and 2062 Storage - Hosts May Not Have Access to MSA Volumes When Updating to VMware ESXi 7.0 Update 2, has been released

2. HPE MSA 1060, 2060, and 2062 Storage Controller Firmware version IN110R001 Release Notes

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[cing · Accepted solution]

Hello,

Thanks for your assistance, I solved my issue.

Best regards

[Sunitha_Mod]

Hello @cing, 

We are glad to know the issue has been resolved.