ISCSI MSA connection to SN2410M using QSPF+ breakout cable

[Alain_Sanchez]

Is this connection of ISCSI MSA 2062 to SN2410M using a QSPF+ breakout cable supported?

Thanks for your support!!!!

[support_s]

System recommended content:

1. HPE SAN Design Reference Guide | HPE MSA 2060/2062 iSCSI Overview

2. HPE 3PAR StoreServ iSCSI Best Practices Configuring iSCSI with DCB

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[sbhat09 · Accepted solution]

Hello @Alain_Sanchez,

Yes. It is supported.

Please find the list of supported parts - https://support.hpe.com/hpesc/public/docDisplay?docId=a00106569en_us&docLocale=en_US

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

[Alain_Sanchez]

Thanks @support_s  Srinivas.

I need to add some Base-T exit switches to the fabric. Any recommendation on what HPE family to use in conjuntion with the two SN2410.

Appreciate your support.

[sbhat09]

Hello @Alain_Sanchez,

I think you can consider another SN2410 or an SN6640C.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.