MSA 2040 disk compatible

[Liellon]

Hi.
In our office, we are using SAN MSA 2040.
To service this device, we periodically buy HDDs to replace those that have failed.
It turned out that one of the hard drives was bought incorrectly by mistake - 872738 instead of 787649.
The supplier refuses to make a replacement because about six months have passed since the purchase.
However, both chassis have drives of the same model (EG001800JWJNR).
Could I use a new drive to installing it in chassis 787649?
Will they be compatible and possibly not cause conflicts at the firmware level?
Best regard, Dmitry.

[SUBHAJIT KHANBARMAN_1]

@Liellon 

As per MSA drive matrix spare part number 872738-001 doesn't show so ideally you shouldn't use it for MSA.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04315770

As per HPE Partsurfer it seems 872738-001 use in Servers,

https://partsurfer.hpe.com/Search.aspx?searchText=872738-001

With Spare part number 787649-001 we found below drive models as per MSA drive matrix which includes EG001800JWJNR as well,

EG001800JWFVC HPD3 J9F49A 787649-001 HPE MSA 1.8TB 12G SAS 10K SFF (2.5IN) 512E ENTERPRISE 3YR WARRANTY HARD DRIVE

EG001800JWJNL HPD2 J9F49A 787649-001 HPE MSA 1.8TB 12G SAS 10K SFF (2.5IN) 512E ENTERPRISE 3YR WARRANTY HARD DRIVE

EG001800JWJNR HPD5 J9F49A 787649-001 HPE MSA 1.8TB 12G SAS 10K SFF (2.5IN) 512E ENTERPRISE 3YR WARRANTY HARD DRIVE

EG1800JEHMD HPD6 J9F49A 787649-001 HPE MSA 1.8TB 12G SAS 10K SFF (2.5IN) 512E ENTERPRISE 3YR WARRANTY HARD DRIVE

EG1800JEMDB HPD5 J9F49A 787649-001 HPE MSA 1.8TB 12G SAS 10K SFF (2.5IN) 512E ENTERPRISE 3YR WARRANTY HARD DRIVE

EG1800JFHMH HPD7 J9F49A 787649-001 HPE MSA 1.8TB 12G SAS 10K SFF (2.5IN) 512E ENTERPRISE 3YR WARRANTY HARD DRIVE

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************