MSA 2040 fresh reinstall - after broken SSDs drives

[ORBIT-IT]

Good morning,

A customer ran into the following article:  Support Bulletin  this issue and now his SSD drives are broken. To my knowledge you are not able to bring them back into life - right?

Furthermore I have now the problem that I am not able to remove the disks from the diskgroup or remove them from the MSA 2040. I just want to reconfigure the system without those SSD drives and go on with the remaining SAS drives. Is there some article or such which can help me? Since the customer has a replicated setup with two MSA 2040 I am not able to reset the storage Volumes or disk groups to default. - A factory reset did not help at all.

Thanks in Advance.

Best regards,

Thorsten