Betreff: MSA 2050 - Unbale to change IP address of controller A & B via Management int

[KH2306]

We are using reclaimed stock from another project, the MSA currently has IP addresses manually assigned and we want to change these to a new vlan but when connected to either controller and typing in the new addresses it just reverts back to the current ones.  Changing via CLi means a visit to the datacentre, the local user account has full access.  Are we missing something or do the controller IP addresses have to be changes by CLi ?

[support_s]

System recommended content:

1. Advisory: HPE MSA 1050, 2050 and 2052 SAN Storage - When Attempting to Change the IP Address of a Controller in an SMU, it Reverts Back to the old IP Address

2. HPE MSA 2050 User Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[KH2306]

Does this mean it cant be done remoteley and requires a site visist with a USB cable connected to the CLI port?

[JonPaul]

@KH2306 
The MSA system has an SSH CLI option as well as the USB Serial CLI option.
What version of firmware is your MSA on?  As you are currently re-purposing it's a great time to update the firmware on both the system and the Drives.
Check these sites for what you need:
https://www.hpe.com/storage/MSAHealthCheck     - Free system review using the array logs
https://www.hpe.com/storage/MSAFirmware    - Quick links to all the firmware you need

[Cali · Accepted solution]

And do you use these Commands (Example)?
set network-parameters ip 192.168.200.187 netmask 255.255.255.0 gateway 192.168.200.1 controller a
set network-parameters ip 192.168.200.188 netmask 255.255.255.0 gateway 192.168.200.1 controller b
show network-parameters

(I would first change Controller A, check the connection, and then Controller B.)

Cali

[KH2306]

Thanks for the replies I am hoping to test this week so will report back

[KH2306]

I was able to configure the controllers with the ssh commands provided and happy to report all online, many thanks for your help

[Sunitha_Mod]

Hello @KH2306, 

Awesome! We are glad to know the problem has been resolved.