Query: quick question for HP MSA 2000 storage

[jintogens]

apologies for I am not a storage person and not that familiar w/ msa2000.

how can i re-activate a disk that was mistakenly pulled out from msa 2000 storage without losing any data?

thanks a lot.

[sbhat09]

Hello @jintogens,

When you have pulled out the disk, certainly the spare disk would have kicked in. If there were no spares, the data would have rebuilt using the parity disk of the RAID configuration. In either of the scenarios, there will not be any data loss. Then, you can put the pulled-out disk back in place just like a new disk (spare or active).

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[support_s]

System recommended content:

1. HPE MSA 2050 SAN Storage - Installing the Enclosures

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Torsten.]

You probably need to clear the metadata of this disk before you can use it again. Check the status!