Storage Server DL380 G4 management problem.

[Antonio_137]

I have just installed an EVA5000 managed by a Storage Server DL380 G4,I followed the initial wizard to configure the server and I have installed CV EVA 4.1.2,everything seems to work fine but when I access the management page in the server (http:\\localhost:2301),it comes up with an error like the servers all options are not detected by the management tool,normally you see a lot of instances on the screen telling you that the power,nic´s,hba´s,etc. are ok on the server,in my case,nothing appears.
Any ideas...??
Thanks in advance.

[Stephen Kebbell · Accepted solution]

Hi Antonio,

firstly, can you log in to System Management Homepage?
If you can, and it shows everything blank, it probably means the SNMP service is not configured.
Go to the services -> SNMP, and set community strings for SNMP (e.g. public set for READ ONLY and private set for READ CREATE) and trap destinations (add 127.0.0.1 as a trap destination), you should also set "Accept SNMP packets from all hosts". Then restart the SNMP service.

Can you see the link for command view EVA?

Regards,
Stephen

[Antonio_137]

Hello Stephen,
I configured the SNMP service as you told me and the Management Homepage is ok now.

Thanks very much.

Regards.

A de Matos.