Adding Ultra 100 TX2 card to LD Pro

[Mark Hill_4]

ello, I have added the card ok, but on boot, it is the default boot device not the raid card where win2k is, any ideas on how to change the boot order? both cards are pci.

TIA

[Greg Carlson]

Mark,

Boot into the BIOS of the Ultra 100TX2 card which has an onboard bios and disable the BIOS on the TX2. That will force you to boot to the Raid controller on the LD Pro. Also remember never to have any PCI cards in PCI slot 8 of the LD Pro or you will have lots of problems because slot 8 shares with SCSI A which controls the CD-ROM.

If you don't have the option to disable BIOS on the TX2 in that cards BIOS. You can boot into the ECU and check your cards boot order in there and set your boot order or you can swap the RAID and TX2 card because you probably have the two cards in reverse order for Boot priority.

Hope that helps,
Greg

[Mark Hill_4]

Thanks again Greg, I will give it a go and let you know what happens.

Thanks

Mark

[Greg Carlson]

Mark,

Was there any change after trying to swap the cards around or diabling the BIOS of the TX2 card?