Problems with Netraid 2M card replacing embedded Symbios

[Veenendaal]

Dear all,

Yesterday, I tried to upgrade an LP1000r server from an embedded Symbios card to a HP Netraid 2M card.

I've placed the NetRAID card in the server and connected the HD's to it. Executed Ctrl-M, but the physical drives were not visible. Only the Processor is?

NetRAID 2M has latest firmware. H.01.08 and HD's worked earlier with Symbios adapter. Does anyone has a clue what went wrong here. The NetRAID adapter is new and has just been delivered by our hardware supplier?

Probably hardware failure?

Remco

[Marco Hogeveen]

Remco,

This can be a problem in the backplane of your server.
Do you know the serialnumber of the server?
I can check if it's in the range.
Powering off and on the server should solve it temporary

Marco.

[Marino Meloni_1]

hi
another part to check in lp1000 is the scsi cable, sometime, moving it can result in bad contact or broking, check it visualy to verify
bye
marino