HPE Community
Netservers
1857312 Members
8798 Online
110372 Solutions
New Discussion

System halted

 
F.Pastor
Occasional Contributor

‎03-30-2002 04:48 AM

‎03-30-2002 04:48 AM

System halted

Trying to install NT 4 workstation, but with this error: DAC960P BIOS call in protected mode: cannot continue. System halted
0 Kudos
2 REPLIES 2
Greg Carlson
Honored Contributor

‎03-30-2002 05:36 AM

‎03-30-2002 05:36 AM

Re: System halted

F.Pastor,

Are you trying to install workstation on your LDpro? That error appears to be related to a Mylex card so I would start by doing a manual install of your OS. Make sure that you skip detection and load your HP drivers instead of MS default drivers. Grab the mylex driver here: http://www.hp.com/bizsupport/servers/hp_server_accessories.html ** The Mylex card is the HPDA driver option--> do you have a pci or eisa based Mylex? **

Ciao,
Greg
Lets Roll!
0 Kudos
Theo Hill_1
Honored Contributor

‎04-01-2002 09:21 AM

‎04-01-2002 09:21 AM

Re: System halted

Are you installing NT workstation or NT server? Workstation is not supported.

http://netserver.hp.com/support/nos_matrix/retiredkmatrx.asp
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.