Error when running the simulator

[toto174]

Hi,

I'm with GNU/Linux testing (jessie).

Kernel : 3.16-2-amd64

virtualbox 4.3.18-dfsg-1 amd64

HNS_7.1.50_x86_64.deb

I installed successful Virtualbox, HNS.

I run HNS and give a try with this config :

#device 1
device_id = 1
#device type is chassis
device_model = SIM1200
#host ip option 
#host_ip = 192.168.100.1
#board slot type and aux_port memory_size
board = SIM1201 : aux_port 51234
#device 2
device_id = 2
#device tyep is box
device_model = SIM1200
#board slot type and aux_port memory_size
board = SIM1201 : aux_port 51235
#connect two interface
device 1 : interface 2 <---> device 2 : interface 2

Then, i start the simulator but i got this error :

Failed to refresh comware version

Also, i gave a try to run it with sudo but it said that it can not to display on "10.0" to the X server.

X11 connection rejected because of wrong authentication.
HP Network Simulator: cannot connect to X server localhost:10.0

Althought i can display the "xclock" command from the terminal.

echo $DISPLAY said me that i'm ok.

I tried :

export DISPLAY="127.0.0.1:10.0"

 But nothing.

So, please, do you have some feedback from installing and running on Linux ?

Thank you in advance for your return.

[Jay_Flora]

Hi toto174,

HNS is supported only on Windows and Ubuntu as of now. I ran your script with the same virtual box image on Ubuntu 14.04 and it ran perfectly fine after I removed the ": aux_port 51234" part from line 8 and 14.

I did not get any errors you've mentioned. It maybe because I used Ubuntu and you're using some other unsupported version of Linux.

Do you have Ubuntu with the same Virtual Box version?

Regards,

Jay