Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1845248
Members
2886
Online
110244
Solutions
Latest Articles and Discussions
Unable to access officeconnect cloud portal
Posted to: Switches, Hubs, and Modems
09-01-2020 Hi all, I am unable to access the officeconnect portal (https://proxy-officeconnect.ext.hpe.com/portal/#/login) - I enter my credentials but after successful authentication I get thrown out ...
1
Kudo
9290
Views
8
Replies
routing between vlan
Posted to: LAN Routing
09-01-2020 Hi,I have a vmware 6.5 cluster (Nutanix) connected to a couple of switchs HPE 10G (JH295A).3 vlan are configured on these switchs.VM's in a same vlan ping other eachother VM's at <1ms.but VM's ...
0
Kudos
6177
Views
3
Replies
Installa module LSPM2SP2P
Posted to: Comware Based
09-01-2020 Hi,I SHOULD INSTALL THE LSPM2SP2P MODULE ON A SWITCH JG236Ahow can i check that it works?Thanks
0
Kudos
6888
Views
21
Replies
HP V1810 Switch - File Transfer Failed. File size is bigger than ...
Posted to: Web and Unmanaged
08-31-2020 HP Procurve V1810 with firmware P.1.17, trying to update using 1st P.1.2, now replaced by P.1.5, always getting the following error message:"File Transfer Failed. File size is bigger than the max ...
0
Kudos
3301
Views
2
Replies
Advantages of lldp-med
Posted to: IP Phones
08-31-2020 Hi to all,I have never configured the LLDP-MED protocol to manage the vlan of voip phones, it does not seem complicated to me but I do not understand the advantages.Normally I create a vlan dedic ...
0
Kudos
9548
Views
1
Reply
HP switch 1920 - JG923A - find IP on specific Port
Posted to: Switches, Hubs, and Modems
08-31-2020 Hi,i have an HP switch 1920-16g JG923A , i would like to know if there is any CLI command to display IP of the connected device on a specific port.thank you.
0
Kudos
5012
Views
1
Reply