Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1827702
Members
3221
Online
109967
Solutions
Latest Articles and Discussions
Deskjet 6122
Posted to: Switches, Hubs, and Modems
05-14-2004 I have a 2 computer home networkPC 98SE with Word2000 connected to printer and routerLaptop XP with Word 2002 connected to routerThe network works perfectly as far as Internet is concerned.It pri ...
0
Kudos
377
Views
3
Replies
Procurve spanning tree behavior
Posted to: Switches, Hubs, and Modems
05-14-2004 I'm considering following installation.Server with two NICs(Intel Server Adapters), two Procurve 2524 switches and spanning tree enabled. In those swithces would have ProCurve 100/1000-T Transcei ...
0
Kudos
755
Views
2
Replies
9304m Firmware
Posted to: Switches, Hubs, and Modems
05-13-2004 I'm looking at upgrading the firmware on my 9304m to the latest version and read a few messages about problems with the 10/100 cards and the 802.1w support with the 7.6.04c release. Is there a n ...
0
Kudos
316
Views
1
Reply
Searching Power supplies for Compaq SW3324
Posted to: Switches, Hubs, and Modems
05-12-2004 Dear all,i need some information where i can get power supplies for the Compaq switch SW3324 with 2 GBit Modules.Because the power supplies from my switches are damaged and there are no warranty. ...
0
Kudos
349
Views
1
Reply
procurve switches 4104/4108 and lacp
Posted to: Switches, Hubs, and Modems
05-12-2004 Procurve 4104/4108 switches have LACP turned on by default. We (at WSU) have observed that video conferencing Polycom units can be interrupted and/or result in a very poor level of service when ...
0
Kudos
398
Views
0
Replies
IP Console Switch - How to clear port config
Posted to: Switches, Hubs, and Modems
05-12-2004 There is one port on my 1x1x16 switch that refuses to release the config of an Interface Adapter that is no longer there. I can connect another to that port and it is recognized, but the switch ...
0
Kudos
371
Views
0
Replies
