Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1829853
Members
2380
Online
109993
Solutions
Latest Articles and Discussions
Link Up/Link Down
Posted to: Switches, Hubs, and Modems
05-12-2004 In Insight Manager 7 I keep getting Information events saying Link Up and Link Down, all from the same stack (ProCurve 4000M). I'm not receiving these from any of the other switches outside of th ...
0
Kudos
1265
Views
5
Replies
5308xl ProCurve meshing to several meshing domains
Posted to: Switches, Hubs, and Modems
05-12-2004 It is possible to configure 1 of 5308xl over several modules to two different "Meshing domains". For example: First "Meshing-Domäne" Switch 1 - 4. Second "Meshing-Domäne" Switch A - DSwitch 3 ...
0
Kudos
322
Views
1
Reply
Inter-Connecting Cisco Router and Bingo router
Posted to: Switches, Hubs, and Modems
05-12-2004 Dear AllWe have cisco router 3745 having ISDN BRI port which is dialing to a Bingo router at remote end , when we dial using cisco router , in isdn statustics we able to see the router has dialed ...
0
Kudos
388
Views
1
Reply
NC8000 Wireless tab missing?
Posted to: Communications and Wireless
05-11-2004 Hi, we've got over a dozen of these 8000NC models running around our office and they work hard wired here and wireless at home. One of them was working fine for months then along came a Java iss ...
0
Kudos
377
Views
6
Replies
HP NIC listing as [?]
Posted to: Communications and Wireless
05-11-2004 Hello, I have two HP NC7770 Gigabit Server Adapters in an ML530 G2. They are teamed for load balancing.One lists as follows : [1]HP NC7770 Gigabit Server Adapter Slot 1 Bus 1The other lists as f ...
0
Kudos
280
Views
1
Reply
Excessive CRC/Alignment Errors on port 5
Posted to: Switches, Hubs, and Modems
05-10-2004 this is the error Excessive CRC/Alignment Errors on port 5. My switch is HP 2525 j4813A
0
Kudos
479
Views
3
Replies
