10.20 hardware supported

[Sue Holdman]

Hi

Does anyone know what the most recent RISC hardware will suport HP-UX 10.20. I need to keep 10.20 running (currently K-class) but need newer hardware.

thanks
Sue.

[Pete Randall]

Sue,

Here's the matrix for workstations:

http://www.hp.com/cgi-bin/pf-new.cgi?IN=/workstations/risc/standard/operating/support_matrix/update.html

and here's the URL for the server matrix (which is unfortunately unavailable at the moment):
http://devresource.hp.com/STK/serversupport.html


Pete

[Sue Holdman]

Thanks Pete,

But that only tells me what 11.xx runs on, not what 10.20 will run on.

Sue.

[Pete Randall]

Sue,

The workstation matrix shows that 10.20 will run on anything up to and including a PA8600. I don't recall exactly what the server matrix showed and I can't get to it at the moment, but I think the fact that you can run on a PA8600 should give you a strong hint.


Pete

[Patrick Wallek]

The latest hardware that I know of that will run 10.20 is the high end K series and I believe the V series.

It will NOT run on L's, N's, rp's, etc.

Anything in the server matrix that shows that it will support 32-bit only or 32-bit and 64-bit should run HP-UX 10.20.

Anything that shows as 64-bit ONLY in the server matrix will definitely NOT run HP-UX 10.20.

I think the most bang-for-the-buck right now if you MUST have 10.20 would be a used K580 that is maxed out on CPU and RAM.

[Hemanth Gurunath Basrur]

Hello Sue,

Also, refer to the foll. link.

http://www.software.hp.com/SUPPORT_PLUS/hwcr.html

HTH.

Regards,
Hemanth

[KCS_1]

Hi,

T600 is supporting H/W,O/S combination on 10.20 with dependencies but I need to check what it is.

According to my document which has made by HP recently, D and K class are supported also.