1833467 Members
4044 Online
110052 Solutions
New Discussion

10.20 hardware supported

 
Sue Holdman
Occasional Contributor

10.20 hardware supported

Hi

Does anyone know what the most recent RISC hardware will suport HP-UX 10.20. I need to keep 10.20 running (currently K-class) but need newer hardware.

thanks
Sue.
6 REPLIES 6
Pete Randall
Outstanding Contributor

Re: 10.20 hardware supported

Sue,

Here's the matrix for workstations:

http://www.hp.com/cgi-bin/pf-new.cgi?IN=/workstations/risc/standard/operating/support_matrix/update.html

and here's the URL for the server matrix (which is unfortunately unavailable at the moment):
http://devresource.hp.com/STK/serversupport.html


Pete

Pete
Sue Holdman
Occasional Contributor

Re: 10.20 hardware supported

Thanks Pete,

But that only tells me what 11.xx runs on, not what 10.20 will run on.

Sue.
Pete Randall
Outstanding Contributor

Re: 10.20 hardware supported

Sue,

The workstation matrix shows that 10.20 will run on anything up to and including a PA8600. I don't recall exactly what the server matrix showed and I can't get to it at the moment, but I think the fact that you can run on a PA8600 should give you a strong hint.


Pete

Pete
Patrick Wallek
Honored Contributor

Re: 10.20 hardware supported

The latest hardware that I know of that will run 10.20 is the high end K series and I believe the V series.

It will NOT run on L's, N's, rp's, etc.

Anything in the server matrix that shows that it will support 32-bit only or 32-bit and 64-bit should run HP-UX 10.20.

Anything that shows as 64-bit ONLY in the server matrix will definitely NOT run HP-UX 10.20.

I think the most bang-for-the-buck right now if you MUST have 10.20 would be a used K580 that is maxed out on CPU and RAM.
Hemanth Gurunath Basrur
Honored Contributor

Re: 10.20 hardware supported

Hello Sue,

Also, refer to the foll. link.

http://www.software.hp.com/SUPPORT_PLUS/hwcr.html

HTH.

Regards,
Hemanth
KCS_1
Respected Contributor

Re: 10.20 hardware supported

Hi,

T600 is supporting H/W,O/S combination on 10.20 with dependencies but I need to check what it is.

According to my document which has made by HP recently, D and K class are supported also.
Easy going at all.