1000Baset networks problems

[Isaac_4]

Hi:
I have a rp3440 hpux box, with 2 network interface at 1000baset interface, one's in the core board and the other in the PCI slot.
The problem that i get is when disconnect and reconnect any of thoses cables RJ45 that comming from the switch. The connection in the other 1000Baset NIC loss. (in this case the cable still conneted)

Some body see something about that ?

Thank You !!!!!

[Steven E. Protter]

Shalom,

Could be you have APA network card teaming running.

That should leave you connected.

You may wish to investigate the following:
/var/adm/syslog/syslog.lgo

Check with the network switch admin for errors when tis happens.

/etc/rc.config.d/netconf
# look for problems and conflicts. HP-UX does not like to lan cards configured for the same network.

if the ip is 192.168.0.10 and the network mask is 255.255.255.0 then the network is 192.168.0 and the host is 10.

SEP

[melvyn burnard]

question posted in the wrong forum, moved to more appropriate forum

[Isaac_4]

thank you for your answer, I change the PCI 1000baset in diferent lan, and get a new symopsis. When desconnect the pci a reconnect de 1000Baset core lan continue working find. But if desconnect de core 1000Baset Nic , both Nic loss the link ?

Im use this configuracion

10.102.1.177 255.255.0.0
140.1.4.203 255.255.0.0

any idea