HPE Community
Operating System - HP-UX
1836453 Members
2733 Online
110101 Solutions
New Discussion

Re: 11.00 and EISA

 
SOLVED
Go to solution
James Odak
Valued Contributor

‎01-23-2001 08:28 AM

‎01-23-2001 08:28 AM

11.00 and EISA

We upgraded one of our servers from 10.20 to 11.00 64 bit

we have a secondary tape(dds) drive that is connected on an EISA card

it no longer works

Is this because of 11.00, the 64 bit or something else?


Jim
0 Kudos
Reply
2 REPLIES 2
Berlene Herren
Honored Contributor

‎01-23-2001 08:31 AM

‎01-23-2001 08:31 AM

Re: 11.00 and EISA

EISA is not supported at 64 bits, so yepper, that could be the problem.

Berlene
http://www.mindspring.com/~bkherren/dobes/index.htm
0 Kudos
Reply
melvyn burnard
Honored Contributor

‎01-24-2001 12:24 AM

‎01-24-2001 12:24 AM

Solution

Re: 11.00 and EISA

There are (and never will be) any drivers for EISA in the 64 bit version of HP-UX 11.x
You will either need to re-install using 32 bit, or change the EISA card for a supported HSC card.
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.