11.23 U ia64 mirror root

[Scott_14]

Hello:

I think I confused myself, coming from a 11.0 background I went to mirror up
a 11.23 U ia64 did some looking and it seems procedures are now quite different or there are some various in responses, can someone direct me the correct way with
this version 11.23 IA??
I started out by the old way with the pvcreate –B
and a mkboot
but now after re-reading some items I think there is a newer way.

thanks
scott

[James R. Ferguson · Accepted solution]

Hi Scott:

Mirroring on Itanium differs slightly from PA-RISC. See Appendix-A of this document:

http://docs.hp.com/en/5991-1236/When_Good_Disks_Go_Bad.pdf

Regards!

...JRF...

[Geoff Wild]

See:

http://www.met.ca/itrc/index.php?option=com_content&task=view&id=34&Itemid=2

Rgds...Geoff

[Scott_14]

Ok another question...

is the 500MB and 400MB guide lines or
Use the actual sizes, I guess I am not sure
where this comes from, since 11.ver3 does bring me to a new level.
thanks


EFI 500MB HPUX 100% HPSP 400MB

[Mridul Shrivastava]

EFI 500MB -> This is required for EFI so on this EFI utilities will be loaded and this is minimum requirement.
HPUX 100% -> Rest of the disk will be used for OS.
HPSP 400MB -> This is optional service partition.

So actually HPUX will be loaded on the second partition cxtydzs2

don't touch s1 and s3

[Scott_14]

WOW thanks everyone,
I am going to need to get up to speed on some changes here but thanks for sharing what you have and explaining what I did not know from earlier versions.

[Torsten.]

This doc is made for 11.31, but it is showing the disk layout for an Integrity server (same for 11.23):

http://docs.hp.com/en/5991-6481/ch03s04.html#babegeeh

[Scott_14]

Well, maybe I am still trying to understand HP ver2,

I am getting a error when I do the idisk -f

If you continue you may destroy all data on this disk.
Do you wish to continue(yes/no)? y
User Aborting!

AM I still not doing something correct?

[Torsten.]

Type "yes"!

[Scott_14]

argh....

thank you, I guess y really does not mean yes on some items, (I am slapping myself)
thanks
scott

[Scott_14]

Thank you again, after going through the steps and doc everyone provided really shows me a bit of a diff with the old 11 ver.

for the /stand/bootconf file

do you have both boot disk in there or just the alt one.

again my thanks.

scott

[Torsten.]

You should have both disks recorded in the bootconf file.

See also
man bootconf

[Scott_14]

Ok that is what I thought I think I beat this into the ground thanks

[Scott_14]

thanks to everyone