Operating System - HP-UX
1833863 Members
2114 Online
110063 Solutions
New Discussion

Re: 3rd party applications on 11.0

 
John Eaton
Frequent Advisor

3rd party applications on 11.0

Does anyone have experience with any of the following applications on a 10.2 to 11.0 upgrade, or on 11.0 installs:
natural (SAGA)
adabas (SAGA)
sysql (SPL)
MQSeries (IBM)
I'm preparing an upgrade to our 5 node MC/SG cluster that uses all of these applications, and we've had our share of gotchas with them at 10.2.
Any feedback, positive or negative, would be welcome. Thanks
2 REPLIES 2
Steve Reynolds
Frequent Advisor

Re: 3rd party applications on 11.0

John,

I do not have specific experience upgrading HPUX in the environment you specified. However
I do have quite a bit of experience with SAG
products.
With ADABAS make sure your database blksizes are compatible with the OS upgrade. In addition
verify that no database start-up parameters
need to be modified.

If you have not contacted SAG support, I would
recommend it. They usually do a good job with
providing you the actions you need to take
for this sort of thing.






Ajay Sishodia
Frequent Advisor

Re: 3rd party applications on 11.0

John,

Don't know about the others but for IBM Mq series you have to get the right release of Mq for the particular OS. So when you are upgrading 10.20 to 11.00 the same Mq won't work.