HPE Community
Operating System - HP-UX
1835667 Members
3209 Online
110082 Solutions
New Discussion

Re: 4 port lan card and lan instance number

 
SOLVED
Go to solution
njia_1
Trusted Contributor

‎02-23-2005 11:56 AM

‎02-23-2005 11:56 AM

4 port lan card and lan instance number

Hi,

We have few rp2470s boot from SAN. I just found out on one of them that a 4 port lan card was installed to a different PCI slot. All other 2470s have a 4 port lan card installed at the same PCI slot.

I reinstalled that 4 port lan card to a different PCI slot to make them all idectical. What happened after this is I got Lan 5, 6, 7,8 on that 2470.

I really want all the lan instance numbers back to 1, 2, 3, and 4.

What should I do?

thanks
Nan
0 Kudos
3 REPLIES 3
Robert Bennett_3
Respected Contributor

‎02-23-2005 12:22 PM

‎02-23-2005 12:22 PM

Solution

Re: 4 port lan card and lan instance number

This link might be helpful

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000073838415

B
"All there is to thinking is seeing something noticeable which makes you see something you weren't noticing which makes you see something that isn't even visible." - Norman Maclean
0 Kudos
Hoang Minh Tuan
Regular Advisor

‎02-23-2005 07:52 PM

‎02-23-2005 07:52 PM

Re: 4 port lan card and lan instance number

I think the Robert's doc is detail introduction of chaning Instance number. But if it do not make you confuse a lot, I think you should give it the same to avoid some unpredict errors

HMT
Bus wait at bus station, Work wait at my work station
0 Kudos
njia_1
Trusted Contributor

‎02-27-2005 04:35 PM

‎02-27-2005 04:35 PM

Re: 4 port lan card and lan instance number

Thanks Robert
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.