A3404A DRIVER

[Nobody's Hero]

Hi,
I am getting ready to install an 'A3404A' Mass storage Fiber card into a K360. It will be used to connect EMC drives. I am running 11.11. The only driver I see on the 11i App Cd is:

Fibr-Chanl-00 B.11.11.09 PCI/HSC FibreChannel; Supptd HW=A6684A,A6685A,A5158A,A6795A.

Do you think this will drive a A3404A?

[Pete Randall · Accepted solution]

Robert,

Well, the K's are either HP-PB or HSC. So if this card is in the HSC expansion slot, then it must be HSC and that driver sounds like it ought to work.

Pete

[Pete Randall]

Yep, PartSurfer (http://partsurfer.hp.com/cgi-bin/spi/main) says it's HSC, so that ought to do it.

Pete

[melvyn burnard]

The A3404A FC card is not supported under HP-UX 11i, so it wil not work.
You need to upgrade them to A5158A's, there was at one stage a trade-in program.

[Victor BERRIDGE]

Hi,
http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A3636-96011/A3636-96011_top.html&con=/hpux/onlinedocs/A3636-96011/00/00/11-con.html&toc=/hpux/onlinedocs/A3636-96011/00/00/11-toc.html&searchterms=A3404A&queryid=20021122-101413



All the best
Victor

[Pete Randall]

Melvyn,

If I recall correctly, Robert is still on 10.20, so that shouldn't be a problem for now - something to think about for the future, though.

Pete

[Nobody's Hero]

The link from Victor says it does support 11.i.
Ok now I am confused.

[Pete Randall]

(I guess I didn't recall correctly)

Pete

[melvyn burnard]

Pete, Roberts opening thread states:

>It will be used to connect EMC drives. I am running 11.11. The only driver I see on the 11i App Cd is:

So 10.20 does not come into this.
Robert, my apologies, I thought of the A3400A which is not suported at 11i.
The A3404A IS supported at 11i, ensutre you patch the FCMs drivers.

[melvyn burnard]

Just out of interest, here are some details for hte card upgrade program:

If you migrate to HSC TachLite A6685A, I believe you can order A3404A opt. 001 for trade-in credit.
Also,

The software driver is part of the DART with HP-UX 10.20 (since DART 35) as product J3630BA and included in the core since HP-UX 11.0.

So I would suggest looking on the CORE cd and not the Apps cd set

[melvyn burnard]

And my fingers run away wiht me again, it is the A3740A PCI card that is not supported at 11i (sigh) guess it is time for a beer.
It also looks like the driver you need is the FCMS Driver on the Core OS CD

[Nobody's Hero]

Thanks Melvin and all. Pour me a beer also.


B.

[Jeff Schussele]

Hi Robert,

Just to stir the pot a little more, I thought I'd point out that if I remember correctly, the A3404A does NOT support switched fabric.
So if you've got Brocades or such in this mix - you'll NEED the A5158A.

Rgds,
Jeff

[Jeff Schussele]

Sheesh....now I've got it......
Of course - no PCI in a K.....

You'd need the 6685 if you've got switched fabric in use.

Rgds,
Jeff