A3519A video card

[Greg Haley_1]

I am having trouble running my HPUX 11.00 K570 through a cybex switch. I am
using a A3519A video card and the appropriate settings on the cybex end.
During boot up I get a terminal display on the remote monitor but as soon as
the system comes up to run the screen goes black.

I have the graph3 driver active on the system, but I am missing something.

[Evan Day_1]

Assuming the remote terminal is a graphics terminal, you might check to verify
that you have the console path set to the proper HW path. I've run into
strange results with both text and graphics terminals where the console path
wasn't set right very similar to the symptoms you are seeing.

At the boot menu it will display the console path. Check this against the HW
path to your graphics card, and, if necessary, use the PATH command to change
it (this is from memory, details may not be 100% accurate)

HTH
-Evan