Anybody can solve my issues?

[sudhapage]

Hi all,

I have posted two problems in ITRC still now problem not solved. I want to solve this issue immediately. Below I have mentioned link for my problems. Please help my dear admins!!!!!!!

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1046477

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1045925

Regards,
Sudhakaran.K

[RAC_1]

To first problem. 60 terminals is default. Increase it to 1024 and check.

/sbin/insf -d pty -n 1024 -e -v
/sbin/insf -d ptym -n 1024 -e -v
/sbin/insf -d telm -s 1024 -e -v
/sbin/insf -d tels -e -s 1024 -v

[RAC_1]

for you second problem,

Is exceed connection from a PC to unix server? And is there a firewall between these two? Can you just telnet session on pc running exceed and set display accordingly and just do xclock etc?

[sudhapage]

RAC,

I am getting same problem.

Regards,
Sudhakaran.K

[RAC_1]

Same problem about what? About nis login or pty error?

[sudhapage]

RAC, ( for my second problem).

Yes, I am connecting pc to Unix Server.

There is no firewall connection, because other users able to getting connected through exceed. Particular user only not able to connect exceed. Prompt is not coming.

I have replaced .dt folder, .profile, .dtprofile , but same issue is continuing.

To set display, it will solve this issue? if yes give me the syntax to set display.

Regards,
Sudhakaran.K

[sudhapage]

RAC, (for my first problem)

after executing below commands also still problem persists.

/sbin/insf -d pty -n 1024 -e -v
/sbin/insf -d ptym -n 1024 -e -v
/sbin/insf -d telm -s 1024 -e -v
/sbin/insf -d tels -e -s 1024 -v

Regards,
Sudhakaran.K

[RAC_1]

For pty problem, can you need to set kernel tuanables first. Kernel tunables npty and nstrpty.

Which OS version do you run?

[sudhapage]

RAC (for pty problem)

VERSION:
HP-UX osshp02 B.11.11 U 9000/785 2003460095 unlimited-user license

for this version we need to set kernal parameters? if yes please provide the details how to set the npty & nstrpty kernal parameters?

Regards,
Sudhakaran.K

[RAC_1]

For pty errors.

kmtune -s npty=1024
kmtune -s nstrpty=1024 and then do insf as told before.

[sudhapage]

RAC (For pty errors:)

For this kernal tuning we need to restart the system?

Regards,
Sudhakaran.K

[RAC_1]

Yes. Those are static parameters.

[sudhapage]

Hi RAC

* Rightnow rebooting is not possible, but it may take some days. After getting permission i will change the kernal values then we will see for this pty problem.

* Have u got any idea about that exceed problem?

Regards,
Sudhakaran.K