armdiscover not responding

[David Sykes]

after executed #armdiscover -v with VA7100
Failed to obtain remote database interface to host: localhost

As i cant solve problem ?

Thanhs

Miguel

[Naveej.K.A]

hi,

ps -ef |grep diald

to check whether diald daemon is running.
else.

cd /opt/sanmgr/commandview/client/sbin
./HA_Dial_Stop
and then
./HA_Dial_Start

With best wishes
Naveej

[Keith Bevan_1]

Miguel

1) Ensure Power/Standby Switch is on

2) Are there any system LEDs on and if so ensure they are all green.
If all LEDS are off check the Enclosure Power Cords at the back of the array

3)Ensure any fibre optic cables are connected to the array as required.

4) cd /opt/sanmgr/commandview/client/sbin
./HA_Dial_Stop
./HA_Dial_Start

5) repeat you armdiscover

Keith

[Bernhard Mueller]

Hi,

check this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?admit=716493758+1083931020372+28353475&thread
Id=469036

Regards,
Bernhard

[Bernhard Mueller]

sorry:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?admit=716493758+1083931020372+28353475&threadId=469036