auto-port aggregation

[Kenneth_18]

Hi,

How do I determine if auto-port aggregation is configured in the server?

How do you configure auto-port aggregation?

Thanks in advance!

[Robert-Jan Goossens · Accepted solution]

Hi,

Software.

http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=J4240AA

Docs.

http://docs.hp.com/hpux/netcom/index.html#Auto%20Port%20Aggregation%20%28APA%29

Regards,
Robert-Jan

[Sanjay Kumar Suri]

Check this link

http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/J4240-90025/J4240-90025_top.html&con=/hpux/onlinedocs/J4240-90025/00/00/34-con.html&toc=/hpux/onlinedocs/J4240-90025/00/00/34-toc.html&searchterms=aggregation%7cauto-port&queryid=20040809-023719


sks

[Alzhy]

TO find out if you have APA installed and what the configured "aggregates" are:

root@goofy # lanscan -q
0
1
4
900 3 2
901 5 6
902
903
904

which means APA aggregate lan900 is composed of lan3 and lan4. lan901 (another aggregate) has lan5 and lan6.

And the following attached is how to configure APA IF you are just after LAN Failover mode (or manual mode). If you want true aggregation, then you can use SAM but be sure your switch ports match with your aggregation mode.