Auto port aggregation

[WilliamSmith11]

Hi
I am configuring four port using APA.
The configuration mode have been set to manual.
Four physical port are in aggregate configuration.

All working fine , but I was makig test , I plug out one net cable and the APA menu in the sam showme 3 port in the aggregate, that is ok.

But when I plug in the net cable back only the aggregated port does not came back

Some recommendation,

Some way to follow.

Regards

W.S

[WilliamSmith11]

I forgot to say that the OS is hpux 11.23

[VK2COT]

Hello,

This is unusual.

a) Can you post contents of
/etc/rc.config.d/hp_apaconf and
/etc/rc.config.d/hp_apaportconf

b) Also, what do these commands show:

# lanscan -v

# lanadmin -x -v 900 (or whatever your PPA is)

Cheers,

VK2COT