HPE Community
Operating System - HP-UX
1825787 Members
2044 Online
109687 Solutions
New Discussion

Bin/Sbin files are "vanishing" after connecting devices to network

 
GrzegorzZ1
Frequent Visitor

‎08-02-2022 01:48 AM - last edited on ‎08-03-2022 08:30 PM by

‎08-02-2022 01:48 AM - last edited on ‎08-03-2022 08:30 PM by

Bin/Sbin files are "vanishing" after connecting devices to network

Hi Community!

I'm not very familiar with the HP-UX, as I'm not administering them at all.

However, we saw that our HP-UX recently started to exeperience weird issue - applications are failing to run, as they are complaining about the missing files in /bin and /sbin directories.

It seems that there's a relation between pluging device to the network and not - this happens to the device once it's on LAN, roughly around 1 minute after booting up. 

I don't see anything in the systems logs:

Jun 3 10:30:56 mkwiag35 syslogd: restart
Jun 3 10:30:56 mkwiag35 vmunix: vuseg=1093000
Jun 3 10:30:56 mkwiag35 vmunix: inet_clts:ok inet_cots:ok nfs_init3 added vfs type nfs3 at slot 5
Jun 3 10:30:56 mkwiag35 vmunix: NOTICE: cachefs_link(): File system was registered at index 6.
Jun 3 10:30:56 mkwiag35 vmunix: NOTICE: autofs_link(): File system was registered at index 7.
Jun 3 10:30:56 mkwiag35 vmunix: t704888 bc
Jun 3 10:30:56 mkwiag35 vmunix: 8/0 GSCtoPCI
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/1/0 btlan5
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/2/0 t60488
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/19/0 c720
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/19/0.4 tgt
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/19/0.4.0 sdisk
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/19/0.7 tgt
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/19/0.7.0 sctl
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/20/0 btlan3
Jun 3 10:30:56 mkwiag35 vmunix: 8/0/63 asio0
Jun 3 10:30:56 mkwiag35 vmunix: 8/16 bus_adapter
Jun 3 10:30:56 mkwiag35 vmunix: 8/16/4 asio0
Jun 3 10:30:56 mkwiag35 vmunix: 8/16/5 c720
Jun 3 10:30:56 mkwiag35 vmunix: 8/16/5.7 tgt
Jun 3 10:30:56 mkwiag35 vmunix: 8/16/5.7.0 sctl
Jun 3 10:30:56 mkwiag35 vmunix: 8/16/0 CentIf
Jun 3 10:30:56 mkwiag35 vmunix: 8/16/1 audio
Jun 3 10:30:56 mkwiag35 vmunix: 8/16/7 ps2
Jun 3 10:30:56 mkwiag35 vmunix: 8/24 graph3
Jun 3 10:30:56 mkwiag35 vmunix: 62 processor
Jun 3 10:30:56 mkwiag35 vmunix: 63 memory
Jun 3 10:30:56 mkwiag35 vmunix: btlan5: Initializing 10/100BASE-TX card at 8/0/1/0....
Jun 3 10:30:56 mkwiag35 vmunix: T60488: card identified and enabled
Jun 3 10:30:56 mkwiag35 vmunix: btlan3: Initializing 10/100BASE-TX card at 8/0/20/0....
Jun 3 10:30:56 mkwiag35 vmunix:
Jun 3 10:30:56 mkwiag35 vmunix: System Console is on the ITE
Jun 3 10:30:56 mkwiag35 vmunix: Digi driver version R5.001 for HP-UX 10.20 (c720) using major=144, supporting
Jun 3 10:30:56 mkwiag35 vmunix: Digi SCSI Terminal Server(TM) and EtherLite(R) modules
Jun 3 10:30:56 mkwiag35 vmunix: Copyright(C) 1992-1998 Digi International Inc., All Rights Reserved.
Jun 3 10:30:56 mkwiag35 vmunix: Networking memory for fragment reassembly is restricted to 11055104 bytes
Jun 3 10:30:56 mkwiag35 vmunix: Logical volume 64, 0x3 configured as ROOT
Jun 3 10:30:56 mkwiag35 vmunix: Logical volume 64, 0x2 configured as SWAP
Jun 3 10:30:56 mkwiag35 vmunix: Logical volume 64, 0x2 configured as DUMP
Jun 3 10:30:56 mkwiag35 vmunix: Swap device table: (start & size given in 512-byte blocks)
Jun 3 10:30:56 mkwiag35 vmunix: entry 0 - major is 64, minor is 0x2; start = 0, size = 819200
Jun 3 10:30:56 mkwiag35 vmunix: Dump device table: (start & size given in 1-Kbyte blocks)
Jun 3 10:30:56 mkwiag35 vmunix: entry 0 - major is 31, minor is 0x4000; start = 379743, size = 131073
Jun 3 10:30:56 mkwiag35 vmunix: Starting the STREAMS daemons.
Jun 3 10:30:56 mkwiag35 vmunix: B2352B HP-UX (B.10.20) #1: Sun Jun 9 08:03:38 PDT 1996
Jun 3 10:30:56 mkwiag35 vmunix:
Jun 3 10:30:56 mkwiag35 vmunix: Memory Information:
Jun 3 10:30:56 mkwiag35 vmunix: physical page size = 4096 bytes, logical page size = 4096 bytes
Jun 3 10:30:56 mkwiag35 vmunix: Physical: 131072 Kbytes, lockable: 85732 Kbytes, available: 101532 Kbytes
Jun 3 10:30:56 mkwiag35 vmunix:
Jun 3 10:30:56 mkwiag35 vmunix: btlan3: NOTE: MII Link Status Not OK - Switch Connection to AUI at 8/0/20/0....
Jun 3 10:30:57 mkwiag35 nettl[449]: nettl starting up.
Jun 3 10:31:01 mkwiag35 vmunix: btlan3: Reset looper timeout: DMA timeout occurred at 8/0/20/0
Jun 3 10:31:01 mkwiag35 vmunix: btlan3: reset state is 550 at 8/0/20/0....
Jun 3 10:31:01 mkwiag35 vmunix: btlan3: WARNING: AUI Loopback Failed at 8/0/20/0....
Jun 3 10:31:17 mkwiag35 vmunix: btlan3: NOTE: MII Link Status Not OK - Switch Connection to AUI at 8/0/20/0....
Jun 3 10:31:17 mkwiag35 inetd[654]: Reading configuration
Jun 3 10:31:17 mkwiag35 inetd[654]: ftp/tcp: Added service, server /usr/lbin/ftpd
Jun 3 10:31:17 mkwiag35 inetd[654]: telnet/tcp: Added service, server /usr/lbin/telnetd
Jun 3 10:31:17 mkwiag35 inetd[654]: tftp/udp: Added service, server /usr/lbin/tftpd
Jun 3 10:31:17 mkwiag35 inetd[654]: bootps/udp: Added service, server /usr/lbin/bootpd
Jun 3 10:31:17 mkwiag35 inetd[654]: login/tcp: Added service, server /usr/lbin/rlogind
Jun 3 10:31:17 mkwiag35 inetd[654]: shell/tcp: Added service, server /usr/lbin/remshd
Jun 3 10:31:17 mkwiag35 inetd[654]: exec/tcp: Added service, server /usr/lbin/rexecd
Jun 3 10:31:17 mkwiag35 inetd[654]: ntalk/udp: Added service, server /usr/lbin/ntalkd
Jun 3 10:31:18 mkwiag35 inetd[654]: auth/tcp: Added service, server /usr/lbin/identd
Jun 3 10:31:18 mkwiag35 inetd[654]: printer/tcp: Added service, server /usr/sbin/rlpdaemon
Jun 3 10:31:18 mkwiag35 inetd[654]: daytime/tcp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: daytime/udp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: time/tcp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: time/udp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: echo/tcp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: echo/udp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: discard/tcp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: discard/udp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: chargen/tcp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: chargen/udp: Added service, server internal
Jun 3 10:31:18 mkwiag35 inetd[654]: kshell/tcp: Added service, server /usr/lbin/remshd
Jun 3 10:31:18 mkwiag35 inetd[654]: klogin/tcp: Added service, server /usr/lbin/rlogind
Jun 3 10:31:18 mkwiag35 inetd[654]: dtspc/tcp: Added service, server /usr/dt/bin/dtspcd
Jun 3 10:31:18 mkwiag35 inetd[654]: recserv/tcp: Added service, server /usr/lbin/recserv
Jun 3 10:31:18 mkwiag35 inetd[654]: spc/tcp: Added service, server /usr/bms/bin/softspcd
Jun 3 10:31:18 mkwiag35 inetd[654]: instl_boots/udp: Added service, server /opt/ignite/lbin/instl_bootd
Jun 3 10:31:18 mkwiag35 inetd[654]: swat/tcp: Added service, server /opt/samba/bin/swat
Jun 3 10:31:18 mkwiag35 inetd[654]: rpc.822083584/tcp: Added service, server /opt/hp3070/bin/pvi
Jun 3 10:31:18 mkwiag35 inetd[654]: rpc.tcpinst/tcp: Added service, server /opt/sicl/bin/siclland
Jun 3 10:31:18 mkwiag35 inetd[654]: rpc.siclland/tcp: Added service, server /opt/sicl/bin/siclland
Jun 3 10:31:18 mkwiag35 inetd[654]: rpc.cmsd/udp: Added service, server /usr/dt/bin/rpc.cmsd
Jun 3 10:31:18 mkwiag35 inetd[654]: rpc.ttdbserver/tcp: Added service, server /usr/dt/bin/rpc.ttdbserver
Jun 3 10:31:18 mkwiag35 inetd[654]: Configuration complete
Jun 3 10:31:42 mkwiag35 vmunix: btlan3: Reset looper timeout: DMA timeout occurred at 8/0/20/0
Jun 3 10:31:42 mkwiag35 vmunix: btlan3: reset state is 550 at 8/0/20/0....
Jun 3 10:31:42 mkwiag35 vmunix: btlan3: WARNING: AUI Loopback Failed at 8/0/20/0....
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] libsmb/nmblib.c:(755)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: Packet send failed to 10.72.16.110(137) ERRNO=No route to host
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_packets.c:(171)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: send_netbios_packet: send_packet() to IP ipaddresshere port 137 failed
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_nameregister.c:(359)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: register_name: Failed to send packet trying to register name MKWIAG11<20>
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] libsmb/nmblib.c:(755)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: Packet send failed to ipaddresshere (137) ERRNO=No route to host
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_packets.c:(171)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: send_netbios_packet: send_packet() to IP ipaddresshere port 137 failed
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_nameregister.c:(359)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: register_name: Failed to send packet trying to register name MKWIAG11<03>
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] libsmb/nmblib.c:(755)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: Packet send failed to 10.72.16.110(137) ERRNO=No route to host
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_packets.c:(171)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: send_netbios_packet: send_packet() to IP ipaddresshere port 137 failed
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_nameregister.c:(359)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: register_name: Failed to send packet trying to register name MKWIAG11<00>
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] libsmb/nmblib.c:(755)
Jun 3 10:31:42 mkwiag35 HP CIFS Server: Samba started successfully; process ids: smbd: 1058, nmbd: 1054
Jun 3 10:31:42 mkwiag35 nmbd[1054]: Packet send failed to ipaddresshere (137) ERRNO=No route to host
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_packets.c:(171)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: send_netbios_packet: send_packet() to IP ipaddresshere port 137 failed
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_nameregister.c:(359)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: register_name: Failed to send packet trying to register name AG3070_JABIL<00>
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] libsmb/nmblib.c:(755)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: Packet send failed to ipaddresshere (137) ERRNO=No route to host
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_packets.c:(171)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: send_netbios_packet: send_packet() to IP ipaddresshere port 137 failed
Jun 3 10:31:42 mkwiag35 nmbd[1054]: [2022/06/03 10:31:42, 0] nmbd/nmbd_nameregister.c:(359)
Jun 3 10:31:42 mkwiag35 nmbd[1054]: register_name: Failed to send packet trying to register name AG3070_JABIL<1e>
Jun 3 10:31:45 mkwiag35 FontServer[1118]: Warning: Rasterizer "/usr/lib/X11/fs/fwrast.sl" could not be loaded: No such file or directory
Jun 3 10:31:46 mkwiag35 FontServer[1118]: Warning: Bad font path element: "/usr/lib/X11/fonts/hp_japanese/100dpi/"
Jun 3 10:31:46 mkwiag35 FontServer[1118]: Warning: Bad font path element: "/usr/lib/X11/fonts/hp_japanese/75dpi/"
Jun 3 10:31:46 mkwiag35 FontServer[1118]: Warning: Bad font path element: "/usr/lib/X11/fonts/hp_korean/75dpi/"
Jun 3 10:31:46 mkwiag35 FontServer[1118]: Warning: Bad font path element: "/usr/lib/X11/fonts/hp_chinese_s/75dpi/"
Jun 3 10:31:46 mkwiag35 FontServer[1118]: Warning: Bad font path element: "/usr/lib/X11/fonts/hp_chinese_t/75dpi/"
Jun 3 10:31:46 mkwiag35 FontServer[1118]: Warning: Bad font path element: "/usr/lib/X11/fonts/fontwave/fwd"
Jun 3 10:31:46 mkwiag35 FontServer[1118]: Warning: Bad font path element: "/usr/lib/X11/fonts/ifojpn.st"
Jun 3 10:31:46 mkwiag35 nmbd[1054]: [2022/06/03 10:31:46, 0] nmbd/nmbd_responserecordsdb.c:(234)
Jun 3 10:31:46 mkwiag35 nmbd[1054]: find_response_record: response packet id 3163 received with no matching record.
Jun 3 10:31:47 mkwiag35 nmbd[1054]: [2022/06/03 10:31:47, 0] nmbd/nmbd_responserecordsdb.c:(234)
Jun 3 10:31:47 mkwiag35 nmbd[1054]: find_response_record: response packet id 3163 received with no matching record.
Jun 3 10:31:47 mkwiag35 nmbd[1054]: [2022/06/03 10:31:47, 0] nmbd/nmbd_responserecordsdb.c:(234)
Jun 3 10:31:47 mkwiag35 nmbd[1054]: find_response_record: response packet id 3164 received with no matching record.
Jun 3 10:31:47 mkwiag35 nmbd[1054]: [2022/06/03 10:31:47, 0] nmbd/nmbd_responserecordsdb.c:(234)
Jun 3 10:31:47 mkwiag35 nmbd[1054]: find_response_record: response packet id 3164 received with no matching record.
Jun 3 10:31:58 mkwiag35 /usr/dt/bin/rpc.ttdbserver[1379]: _Tt_session::client_session_init(): TT_AUTHFILE_ENTRY_MISSING
Jun 3 10:31:59 mkwiag35 last message repeated 3 times
Jun 3 10:32:11 mkwiag35 automountd[630]: gethostbyname failed for mkwiag35
Jun 3 10:32:11 mkwiag35 automountd[630]: gethostbyname failed for mkwiag35
Jun 3 10:32:39 mkwiag35 syslog: libtt[1387]: _Tt_rpc_client::init(): fcntl(F_SETFD): m
Jun 3 10:32:39 mkwiag35 syslog: libtt[1387]: ttdt_Xt_input_handler(): tttk_message_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_open() has not been called yet. If this code is returned from tt_open() it means ttsession could not be started, which generally means ToolTalk is not installed on this system.
Jun 3 10:32:39 mkwiag35 syslog: libtt[1237]: _Tt_rpc_client::init(): fcntl(F_SETFD): m
Jun 3 10:32:39 mkwiag35 syslog: libtt[1237]: ttdt_Xt_input_handler(): tttk_message_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_open() has not been called yet. If this code is returned from tt_open() it means ttsession could not be started, which generally means ToolTalk is not installed on this system.
Jun 3 10:32:57 mkwiag35 automountd[630]: gethostbyname failed for mkwiag35
Jun 3 10:32:57 mkwiag35 automountd[630]: gethostbyname failed for mkwiag35
Jun 3 10:36:25 mkwiag35 vmunix: btlan3: NOTE: MII Link Status Not OK - Switch Connection to AUI at 8/0/20/0....
Jun 3 10:36:25 mkwiag35 vmunix: btlan3: Reset looper timeout: DMA timeout occurred at 8/0/20/0
Jun 3 10:36:25 mkwiag35 vmunix: btlan3: reset state is 550 at 8/0/20/0....
Jun 3 10:36:25 mkwiag35 vmunix: btlan3: WARNING: AUI Loopback Failed at 8/0/20/0....
Jun 3 10:36:25 mkwiag35 automountd[630]: Request by non-root user!!!
Jun 3 10:36:41 mkwiag35 automountd[630]: Request by non-root user!!!
Jun 3 10:36:56 mkwiag35 automountd[630]: gethostbyname failed for mkwiag35
Jun 3 10:36:56 mkwiag35 automountd[630]: gethostbyname failed for mkwiag35
Jun 3 10:37:04 mkwiag35 LVM[2199]: /sbin/lvlnboot -v vg00
Jun 3 10:37:04 mkwiag35 LVM[2202]: /sbin/lvlnboot -v vg00
Jun 3 10:37:10 mkwiag35 LVM[2247]: /sbin/lvlnboot -v vg00
Jun 3 10:37:11 mkwiag35 LVM[2250]: /sbin/lvlnboot -v vg00
Jun 3 10:37:15 mkwiag35 automountd[2289]: Request by non-root user!!!
Jun 3 10:37:26 mkwiag35 LVM[2313]: /sbin/lvlnboot -v vg00
Jun 3 10:37:26 mkwiag35 LVM[2316]: /sbin/lvlnboot -v vg00
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_nameregister.c:(121)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: register_name_response: server at IP 10.72.147.28 rejected our name registration of MKWIAG11<20> with error code 6.
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_mynames.c:(39)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: my_name_register_failed: Failed to register my name MKWIAG11<20> on subnet 10.72.147.35.
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_namelistdb.c:(288)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: standard_fail_register: Failed to register/refresh name MKWIAG11<20> on subnet 10.72.147.35
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_nameregister.c:(121)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: register_name_response: server at IP 10.72.147.28 rejected our name registration of MKWIAG11<03> with error code 6.
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_mynames.c:(39)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: my_name_register_failed: Failed to register my name MKWIAG11<03> on subnet 10.72.147.35.
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_namelistdb.c:(288)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: standard_fail_register: Failed to register/refresh name MKWIAG11<03> on subnet 10.72.147.35
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_responserecordsdb.c:(234)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: find_response_record: response packet id 3179 received with no matching record.
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_nameregister.c:(121)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: register_name_response: server at IP 10.72.147.28 rejected our name registration of MKWIAG11<00> with error code 6.
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_mynames.c:(39)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: my_name_register_failed: Failed to register my name MKWIAG11<00> on subnet 10.72.147.35.
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_namelistdb.c:(288)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: standard_fail_register: Failed to register/refresh name MKWIAG11<00> on subnet 10.72.147.35
Jun 3 10:38:00 mkwiag35 nmbd[1054]: [2022/06/03 10:38:00, 0] nmbd/nmbd_responserecordsdb.c:(234)
Jun 3 10:38:00 mkwiag35 nmbd[1054]: find_response_record: response packet id 3180 received with no matching record.
Jun 3 10:44:00 mkwiag35 automountd[2289]: gethostbyname failed for mkwiag35
Jun 3 10:44:42 mkwiag35 last message repeated 3 times
Jun 3 10:46:03 mkwiag35 bootpd[2907]: bootpd 2.4 #1.17.112.8: Tue Jun 27 07:04:50 GMT 2000
Jun 3 10:46:03 mkwiag35 bootpd[2907]: reading "/etc/dhcptab"
Jun 3 10:46:03 mkwiag35 bootpd[2907]: group count: 0
Jun 3 10:46:03 mkwiag35 bootpd[2907]: reading "/etc/bootptab"
Jun 3 10:46:03 mkwiag35 bootpd[2907]: bad hardware address for host "module1"
Jun 3 10:46:03 mkwiag35 bootpd[2907]: entry with hostname "module1" will be ignored.
Jun 3 10:46:03 mkwiag35 bootpd[2907]: bad hardware address for host "module0"
Jun 3 10:46:03 mkwiag35 bootpd[2907]: entry with hostname "module0" will be ignored.
Jun 3 10:46:03 mkwiag35 bootpd[2907]: read 4 entries from "/etc/bootptab"
Jun 3 10:46:48 mkwiag35 nmbd[1054]: [2022/06/03 10:46:48, 0] nmbd/nmbd_namequery.c:(112)
Jun 3 10:46:48 mkwiag35 nmbd[1054]: query_name_response: Multiple (2) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Jun 3 10:46:48 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Jun 3 10:51:48 mkwiag35 nmbd[1054]: [2022/06/03 10:51:48, 0] nmbd/nmbd_namequery.c:(112)
Jun 3 10:51:48 mkwiag35 nmbd[1054]: query_name_response: Multiple (2) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Jun 3 10:51:48 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Jun 3 10:56:48 mkwiag35 nmbd[1054]: [2022/06/03 10:56:48, 0] nmbd/nmbd_namequery.c:(112)
Jun 3 10:56:48 mkwiag35 nmbd[1054]: query_name_response: Multiple (2) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Jun 3 10:56:48 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Jun 3 10:57:09 mkwiag35 syslog: libtt[2962]: _Tt_rpc_client::init(): fcntl(F_SETFD): m
Jun 3 10:57:09 mkwiag35 syslog: libtt[2809]: _Tt_rpc_client::init(): fcntl(F_SETFD): m
Jun 3 10:57:09 mkwiag35 syslog: libtt[2962]: ttdt_Xt_input_handler(): tttk_message_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_open() has not been called yet. If this code is returned from tt_open() it means ttsession could not be started, which generally means ToolTalk is not installed on this system.
Aug 1 12:15:35 mkwiag35 nmbd[1054]: [2022/08/01 12:15:35, 0] nmbd/nmbd_namequery.c:(112)
Aug 1 12:15:35 mkwiag35 nmbd[1054]: query_name_response: Multiple (2) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Aug 1 12:15:35 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Aug 1 12:15:35 mkwiag35 nmbd[1054]: [2022/08/01 12:15:35, 0] nmbd/nmbd_namequery.c:(112)
Aug 1 12:15:35 mkwiag35 nmbd[1054]: query_name_response: Multiple (3) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Aug 1 12:15:35 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Aug 1 12:15:35 mkwiag35 nmbd[1054]: [2022/08/01 12:15:35, 0] nmbd/nmbd_namequery.c:(112)
Aug 1 12:15:35 mkwiag35 nmbd[1054]: query_name_response: Multiple (4) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Aug 1 12:15:35 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Aug 1 12:15:40 mkwiag35 automountd[2289]: gethostbyname failed for mkwiag35
Aug 1 12:15:45 mkwiag35 automountd[2289]: gethostbyname failed for mkwiag35
Aug 1 12:16:35 mkwiag35 syslog: libtt[3260]: _Tt_rpc_client::init(): fcntl(F_SETFD): m
Aug 1 12:16:35 mkwiag35 syslog: libtt[3260]: ttdt_Xt_input_handler(): tttk_message_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_open() has not been called yet. If this code is returned from tt_open() it means ttsession could not be started, which generally means ToolTalk is not installed on this system.
Aug 1 12:16:35 mkwiag35 syslog: libtt[3624]: _Tt_rpc_client::init(): fcntl(F_SETFD): m
Aug 1 12:16:35 mkwiag35 syslog: libtt[3624]: ttdt_Xt_input_handler(): tttk_message_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_open() has not been called yet. If this code is returned from tt_open() it means ttsession could not be started, which generally means ToolTalk is not installed on this system.
Aug 1 12:16:35 mkwiag35 syslog: libtt[3410]: _Tt_rpc_client::init(): fcntl(F_SETFD): m
Aug 1 12:16:35 mkwiag35 syslog: libtt[3410]: ttdt_Xt_input_handler(): tttk_message_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_open() has not been called yet. If this code is returned from tt_open() it means ttsession could not be started, which generally means ToolTalk is not installed on this system.
Aug 1 12:16:46 mkwiag35 /usr/dt/bin/rpc.ttdbserver[3798]: _Tt_session::client_session_init(): TT_AUTHFILE_ENTRY_MISSING
Aug 1 12:16:49 mkwiag35 last message repeated 35 times
Aug 1 12:20:36 mkwiag35 nmbd[1054]: [2022/08/01 12:20:36, 0] nmbd/nmbd_namequery.c:(112)
Aug 1 12:20:36 mkwiag35 nmbd[1054]: query_name_response: Multiple (2) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Aug 1 12:20:36 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Aug 1 12:20:36 mkwiag35 nmbd[1054]: [2022/08/01 12:20:36, 0] nmbd/nmbd_namequery.c:(112)
Aug 1 12:20:36 mkwiag35 nmbd[1054]: query_name_response: Multiple (3) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Aug 1 12:20:36 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Aug 1 12:20:36 mkwiag35 nmbd[1054]: [2022/08/01 12:20:36, 0] nmbd/nmbd_namequery.c:(112)
Aug 1 12:20:36 mkwiag35 nmbd[1054]: query_name_response: Multiple (4) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Aug 1 12:20:36 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Aug 1 12:21:23 mkwiag35 automountd[2289]: gethostbyname failed for mkwiag35
Aug 1 12:25:33 mkwiag35 nmbd[1054]: [2022/08/01 12:25:33, 0] nmbd/nmbd_namequery.c:(112)
Aug 1 12:25:33 mkwiag35 nmbd[1054]: query_name_response: Multiple (2) responses received for a query on subnet 10.72.147.35 for name AG3070_JABIL<1d>.
Aug 1 12:25:33 mkwiag35 nmbd[1054]: This response was from IP 10.72.147.15, reporting an IP address of 10.72.147.15.
Aug 1 12:28:06 mkwiag35 automountd[2289]: gethostbyname failed for mkwiag35

 

 

0 Kudos
Reply
1 REPLY 1
Steven Schweda
Honored Contributor

‎08-02-2022 08:25 AM

‎08-02-2022 08:25 AM

Re: Bin/Sbin files are "vanishing" after connecting devices to network

> [...] applications are failing to run, as they are complaining about
> the missing files in /bin and /sbin directories.

   _Which_ "applications"?  _Which_ "the missing files"?  As usual,
showing actual actions/commands with their actual output (error
messages) can be more helpful than your summary of what it all means.

> I don't see anything in the systems logs:

   HP-UX 10.20 is older than anything I have, and I know nothing about
your hardware, but...

> Jun 3 10:30:56 mkwiag35 vmunix: btlan5: Initializing 10/100BASE-TX card at 8/0/1/0....
> Jun 3 10:30:56 mkwiag35 vmunix: T60488: card identified and enabled

   Ok.

> Jun 3 10:30:56 mkwiag35 vmunix: btlan3: Initializing 10/100BASE-TX card at 8/0/20/0....

> Jun 3 10:30:56 mkwiag35 vmunix: btlan3: NOTE: MII Link Status Not OK - Switch Connection to AUI at 8/0/20/0....
> Jun 3 10:30:57 mkwiag35 nettl[449]: nettl starting up.
> Jun 3 10:31:01 mkwiag35 vmunix: btlan3: Reset looper timeout: DMA timeout occurred at 8/0/20/0
> Jun 3 10:31:01 mkwiag35 vmunix: btlan3: reset state is 550 at 8/0/20/0....
> Jun 3 10:31:01 mkwiag35 vmunix: btlan3: WARNING: AUI Loopback Failed at 8/0/20/0....
> Jun 3 10:31:17 mkwiag35 vmunix: btlan3: NOTE: MII Link Status Not OK - Switch Connection to AUI at 8/0/20/0....

   I know nothing, but I might start by looking at the hardware
associated with "btlan3".

> Jun 3 10:31:42 mkwiag35 nmbd[1054]: Packet send failed to 10.72.16.110(137) ERRNO=No route to host

   What are the IP addresses (subnet masks, ...) associated with these
network interfaces?  "No route to host" suggests (to me) a basic network
problem.

   If your (unspecified) "the missing files" are actually remote, and
your network is broken, then that might not be amazing.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.