stratus hardware error

[sunyong1]

stratus hard ware error 

Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Board Broken, warm reset given
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Reset = 0x8, IFault = 0x3030303, ErrByte = 0x0
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) ControlErr = 0x0, Misc = 0x8000800, InfoErr = 0x0
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) ASIC = 0x11111111, Common = 0x8080808, IState = 0x84110e
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Test = 0x0, Voter = 0x0
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Hbus cross-check error 0x20
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Rbus 1 cross-check error 0xa0
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Hbus cross-check error 0x30
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Rbus 1 cross-check error 0xa
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Rbus 1 cross-check error 0xa0
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Giving Cold Reset after salvaging registers
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Hbus cross-check error 0x20
Aug 24 11:57:33 tcc1 vmunix: SRA[FTS,c0] (0/1) fts_handle_disable: old_fault_code = 0, flags = 0x0 code = 0
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Hbus cross-check error 0x30
Aug 24 11:57:33 tcc1 vmunix: SRA[FTS,c0] (0/1) Disabling Device on Maintenace Fault
Aug 24 11:56:55 tcc1 vmunix: SRA[FTS,c1] (0/1) Rbus 1 cross-check error 0xa
Aug 24 11:57:33 tcc1 vmunix: SRA[FTS,c0] (0/1) Disabling
Aug 24 11:58:20 tcc1 vmunix: SRA[FTS,c1] (0/1) turning red_light on
Aug 24 11:58:20 tcc1 vmunix: SRA[FTS,c1] (0/1) MTBF Acceptable, (re)enabling
Aug 24 11:59:07 tcc1 vmunix: SRA[FTS,c0] (0/1) Enabling
Aug 24 11:59:53 tcc1 vmunix: SRA[FTS,c1] (0/1) turning red_light off
Aug 24 11:59:54 tcc1 vmunix: SRA[DUP,c0] (0/1) Bringing up pair (1)
Aug 24 12:03:13 tcc1 vmunix: SRA[DUP,c0] (0/1) Pairing complete.

doesn any one know what is this error and how what where who

please i need help

[Suman_1978]

Hi,

Please refer to this POST.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[Duncan Edmonstone]

This is a stratus ftServer error message. I doubt anyone at HPE or on  these forums will be able to help.Yiou should speak with Stratus (I assume you have a Stratus support contract? Not sure anyone should be running anything that is so critical it needs a fault tolerant server without support)

[Suman_1978]

Hello @sunyong1 

Let me know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Thankyou
Suman