HPE Community
Operating System - HP-UX
1826337 Members
4090 Online
109692 Solutions
New Discussion

BL860C i2 OS installation crash trying from ignite server

 
Joe Kanakaraj
Advisor

‎03-21-2011 01:19 AM

‎03-21-2011 01:19 AM

BL860C i2 OS installation crash trying from ignite server

Hi All,

recently we are trying to install a BL860C i2 server from the ignite server. but it crashes after the mini kernel loads , Please find the attached screen shots .

Please let me know if any pre boot steps we need to consider
Unix is simple, but it takes a genius to understand the simplicity. - quoted Dennis Ritchie
0 Kudos
Reply
2 REPLIES 2
melvyn burnard
Honored Contributor

‎03-21-2011 02:43 AM

‎03-21-2011 02:43 AM

Re: BL860C i2 OS installation crash trying from ignite server

Which update version of HP-UX 11iv3 are you using?
The BL860ci2 needs a minimum of March 2010.
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
0 Kudos
Reply
Bill Hassell
Honored Contributor

‎03-21-2011 04:50 AM

‎03-21-2011 04:50 AM

Re: BL860C i2 OS installation crash trying from ignite server

Ignite is very hardware dependent. You'll need the latest version of Ignite installed on your server. If you choose the built-in image that comes with the Ignite package, it will support i2 blade hardware. Otherwise, any image you already have must be compatible with i2 blade design. Here's the latest Ignite images:

http://h71028.www7.hp.com/enterprise/us/en/os/hpux11i-system-management-ignite-ux.html?jumpid=reg_R1002_USEN

Be sure to read the note about multi-tape backups for 11.31 Itanium systems.


Bill Hassell, sysadmin
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.