Operating System - HP-UX
1824069 Members
2794 Online
109668 Solutions
New Discussion юеВ

BL870c internal disk drive configuration with HP-UX v2/3

 
A.W.R
Frequent Advisor

BL870c internal disk drive configuration with HP-UX v2/3

Hi,

I am setting internal drives with an integrated mirror. I now want partition the drive to include the HPSP service partition and the EFI partition. I am going to install the HP-UX v3 via the DVD on the USB port into the HP-UX partition. This does not create the HPSP and the EFI partitions.

Thanks
Andrew

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: BL870c internal disk drive configuration with HP-UX v2/3

"This does not create the HPSP and the EFI partitions."

What does confirm this?

Without an EFI partition your system will not boot at all.

Does hp-ux already run?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
A.W.R
Frequent Advisor

Re: BL870c internal disk drive configuration with HP-UX v2/3

Hi,

No, HP-UX has not been loaded.

We are trying to create an integrated mirror, and then load the OS from a USB attached DVD.

Thanks
Andrew
Torsten.
Acclaimed Contributor

Re: BL870c internal disk drive configuration with HP-UX v2/3

The installation process will automagically create this partitions - any problems during installation?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!