Blade name under HPUX

[DUCHENOY]

With a bl860c under hpux 11i v2, is it possible to retrieve the name of the blade ?

[Robert-Jan Goossens_1]

Christophe,

What about the model command?

# model

Regards,
Robert-Jan

[Oviwan]

Hey

It will also be bl860c. Since Sep 2007 you can also install 11iv3.

Regards

[Steven E. Protter]

Shalom,

Beyond the model command, any further information on the blade will need to be accesses via the iLo port on the blade.

SEP

[whiteknight]

Chris,

You can use OA commandline to retrieve the name too

OA-001A4BCDF332> show server info 1

Server Blade #1 Information:
Type: Server Blade
Manufacturer: hp
Product Name: server BL860c
Part Number: AD323A
System Board Spare Part Number:
Serial Number: USE7234MV8
Server Name: [Unknown]
Asset Tag: [Unknown]
ROM Version: ROM A 1.01

WK

[rick jones]

Do you mean the model name of the blade, while running on the blade itself, or do you mean getting the hostname of the blade from the OA (?)

The machinfo command can also have useful/interesting data in its output, although I doubt that is what you are looking for here.

[DUCHENOY]

Ok, my question wasn't clear enough...
The name I need is Rack Name of the blade (see attachment for an example).

[Andrew Rutter]

hi,

if you have HP SIM(systems insight manager) installed you should be able to get this from there.

check out
http://h71028.www7.hp.com/ERC/downloads/4AA1-1238ENW.pdf

Andy

[DUCHENOY]

Too bad, but it seems to be impossible...