1833789 Members
2463 Online
110063 Solutions
New Discussion

Blade name under HPUX

 
DUCHENOY
Occasional Advisor

Blade name under HPUX

With a bl860c under hpux 11i v2, is it possible to retrieve the name of the blade ?
8 REPLIES 8
Robert-Jan Goossens_1
Honored Contributor

Re: Blade name under HPUX

Christophe,

What about the model command?

# model

Regards,
Robert-Jan
Oviwan
Honored Contributor

Re: Blade name under HPUX

Hey

It will also be bl860c. Since Sep 2007 you can also install 11iv3.

Regards
Steven E. Protter
Exalted Contributor

Re: Blade name under HPUX

Shalom,

Beyond the model command, any further information on the blade will need to be accesses via the iLo port on the blade.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
whiteknight
Honored Contributor

Re: Blade name under HPUX


Chris,

You can use OA commandline to retrieve the name too

OA-001A4BCDF332> show server info 1

Server Blade #1 Information:
Type: Server Blade
Manufacturer: hp
Product Name: server BL860c
Part Number: AD323A
System Board Spare Part Number:
Serial Number: USE7234MV8
Server Name: [Unknown]
Asset Tag: [Unknown]
ROM Version: ROM A 1.01

WK
Problem never ends, you must know how to fix it
rick jones
Honored Contributor

Re: Blade name under HPUX

Do you mean the model name of the blade, while running on the blade itself, or do you mean getting the hostname of the blade from the OA (?)

The machinfo command can also have useful/interesting data in its output, although I doubt that is what you are looking for here.

there is no rest for the wicked yet the virtuous have no pillows
DUCHENOY
Occasional Advisor

Re: Blade name under HPUX

Ok, my question wasn't clear enough...
The name I need is Rack Name of the blade (see attachment for an example).
Andrew Rutter
Honored Contributor

Re: Blade name under HPUX

hi,

if you have HP SIM(systems insight manager) installed you should be able to get this from there.

check out
http://h71028.www7.hp.com/ERC/downloads/4AA1-1238ENW.pdf

Andy
DUCHENOY
Occasional Advisor

Re: Blade name under HPUX

Too bad, but it seems to be impossible...