can't detect internal disks during installing hpux 11i v2

[napoly]

hi all
during fresh installation on HP N4000 server has already hpux 11.00 installed.
i can't detect internal disks when booting from the CDROM

note that
we upgrade firmware for PDC to 43.43
after rebooting the server nothing has changed

[Mel Burslan]

Since nothing other than the firmware is altered, can you still boot to 11.0 from the existing internal disk ?

if you can, can you see all disks on an ioscan output ?

[napoly]

i'm still able to boot from hpux 11.00 ,you know disks stopped me from continue installing from the begining

about the disks ,the server contain only internal disks ,it doesn't connected to any external storage.

only one disks doesn't appear

[Mel Burslan]

if you can not see one of the internal disks under 11.0 boot, there is a possibility that when you shut down the system, that disk went dead (hardware wise) and that might be the reason why 11.23 install is hung with no disks detected. If this is the case, try pulling out the faulty disk and try booting from 11.23 CD.

[napoly]

i got the problem

our scsi cards are not supported to operate with hpux 11i v2

thanks for your support

[napoly]

i have got the problem

our scsi cards are not supported to operate with hpux 11i v2

thanks for your support