HPE Community
Operating System - HP-UX
1837025 Members
2400 Online
110111 Solutions
New Discussion

CDE not starting

 
Shahul
Esteemed Contributor

‎08-26-2001 09:44 PM

‎08-26-2001 09:44 PM

CDE not starting

Hi Admins

I have a C3600 workstation with fx5 graphics card. As a part of diagnostics, I changed the fx5 card form one slot to another. Now unfortunately, CDE is not getting started. What is to be done for this, Replys are highly appreciated.

TIA

Shahul
0 Kudos
Reply
1 REPLY 1
Bill McNAMARA_1
Honored Contributor

‎08-27-2001 12:07 AM

‎08-27-2001 12:07 AM

Re: CDE not starting

The following link shows an interesting procedure...
It may or may not be related, but should give you some idea on what is going wrong related to h/w path and device file change.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x0e6d1012aa92d5118ff10090279cd0f9,00.html

Later,
Bill
It works for me (tm)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.