cfg2html file contents

[A.W.R]

Hi,

We are using cfg2html to capture system configuration information.

On one Superdome this works with no problem, and we get all the cellboard information.

On another Superdome we do not get the cellboard information. If I look in the .err file it shows:-

olrad:ERROR:Command only for internal use
vxvm:vxdg: ERROR: IPC failure: Configuration daemon is not accessible
olrad -q":
olrad:ERROR:Command only for internal use
stderr output from "SuperDomeInfo":
Error: Partition information unavailable.
Error: Partition information unavailable.
Error: Cell information unavailable.
Error: Cell information unavailable.
Error: Cabinet information unavailable.
Error: Cabinet information unavailable.
Warning: No action specified. Default behaviour is display all.
Error: Cabinet information unavailable.
Error: Cabinet information unavailable.
Error: Cell information unavailable.
Error: Partition information unavailable.
Error: Cabinet information unavailable.
Error: Partition information unavailable.
stderr output from "frupower -d -C":
Error: Cell information unavailable. (0)
stderr output from "frupower -d -I":
Error: Cabinet information unavailable. (0)
stderr output from "rpcinfo -u 127.0.0.1 100003":
rpcinfo: RPC: Program not registered
stderr output from "showmount -a":
showmount: mtnh05: RPC: Program not registered
stderr output from "SCM_collector":
Exception in thread "main" com.hp.mx.utilities.authenticate.MxUndefinedNodeKeyException: Unable to read the node public key.
at com.hp.mx.utilities.authenticate.MxAuthenticate.setKeys(Unknown Source)
Exception in thread "main" com.hp.mx.utilities.authenticate.MxUndefinedNodeKeyException: Unable to read the node public key.
at com.hp.mx.utilities.authenticate.MxAuthenticate.setKeys(Unknown Source)
Exception in thread "main" com.hp.mx.utilities.authenticate.MxUndefinedNodeKeyException: Unable to read the node public key.
at com.hp.mx.utilities.authenticate.MxAuthenticate.setKeys(Unknown Source)
Exception in thread "main" com.hp.mx.utilities.authenticate.MxUndefinedNodeKeyException: Unable to read the node public key.
at com.hp.mx.utilities.authenticate.MxAuthenticate.setKeys(Unknown Source)
stderr output from "(/opt/hpsmc/shc/bin/shc -V; /opt/hpsmc/shc/bin/shc -q)":
SHC is not running.
stderr output from "vxdisk list":
vxvm:vxdisk: ERROR: IPC failure: Configuration daemon is not accessible
stderr output from "/opt/cfg2html/./plugins/VxVM_collect.sh":
vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible

Any suggestions on how we can fix this would be greatly appraciated?

Thanks
Andrew

[Torsten.]

Hard to suggest something, because you did not mention your OS.

How about the patch bundles?
Are they current?
If not, install latest bundles.

AFAIR, in some older releases "olrad" command was only refered as "rad" (must be really old ;-))

[A.W.R]

Hi,

Thanks for your input. I have compared the software installed on the system where the cfg2html command works correctly, and to this one.

Both have

GOLDAPPS11i B.11.11.0406.5 Gold Applications Patches for HP-UX 11i v1, June 2004
GOLDBASE11i B.11.11.0406.5 Gold Base Patches for HP-UX 11i v1, June 2004

The only diference I could find is that on the system that does not work the additional software ISEEPlatform A.03.95.026 ISEE Platform is installed.

The system where the command works also has iCAP processors.

Hope this helps.

[Torsten.]

I would think about an update anyway - your patches are 3 years old.
See

http://www8.itrc.hp.com/service/patch/releasePage.do?BC=main|releaseIndexPage|&releaseId=5013-6539