1828401 Members
3738 Online
109977 Solutions
New Discussion

Re: Changing bridged net

 
Luk Vandenbussche
Honored Contributor

Changing bridged net

I have replace a rp5470 by a rp4440 in my cluster. The lan interface have changed

I have the following config on the two nodes)

Brigded net 1 : lan0 and lan1 stb
Brigded net 2 : lan2

I need tho change it to the following config on the rp4440

Bridged 1 : lan2 and lan4 stb
Bridged 2 : lan6

My linkloop is working fine between al the bridged lans.

Can I (and how) perform these changes while my the new rp4440 node is down and the other is up and running?
2 REPLIES 2
Stephen Doud
Honored Contributor

Re: Changing bridged net

The easiest way is to remove the node from the cluster and re-add it, but using the new network configuration in the cluster configuration file.

See this document in the ITRC database:

UMCSGKBRC00009727
TITLE: Changing LAN information in a ServiceGuard cluster


-sd-
Luk Vandenbussche
Honored Contributor

Re: Changing bridged net

We solved the problem by changing the lan numbering with ioinit