Changing IP Address in HPUX Bind Database

[Vincent Lee_3]

I have apply the change by editing the netconf file but upon boot up , network error,Hence could not access from other workstation and could not ping to HP 9000 Server. I try using SAM to make the changes but error prompt shows that the IP address is in a BInd Database and could not make any changes via SAM.

Below shows the filr info when listed in server:
-r--r--r-- 1 bin bin 4000 Apr 25 11:40 netconf.

Please advise as I need to implement it soon.

Thanks

[Devender Khatana]

Hi,

I think the entries you have made may not be in correct syntax. Can you attach your neconf file and the output of "ioscan -fnC lan".

What does "ifconfig lanX" says.

Also attach "lanscan -q"

HTH,
Devender

[Suraj Singh_1]

Hi Lee,

Try giving the IP manually using ifconfig command. Does the IP get assigned using this command? If yes, then the syntax used in /etc/rc.config.d/netconf is wrong & if no, then the card is not either not available to OS or the driver for the card is not installed.

Regards