checking clock speed

[Chern Jian Leaw]

HI,

What is the command to check the clock speed for a particular HP machine? i.e it's a J2240 model.

Or, can anyone show me how to write a script to obtain the clock speed info?

Thanks.

[Michael Tully · Accepted solution]

Hi,

This should work. The output below is from an N4000 which 550MHz processors.

# echo itick_per_usec/D | adb -k /stand/vmunix /dev/kmem
itick_per_usec:
itick_per_usec: 550

HTH
Michael

[S.K. Chan]

You don't need a script. It's one liner command..

# echo "itick_per_usec/D" | adb -k /stand/vmunix /dev/kmem

OR

Use SAM:-
Sam->Performance
Performance Monitors->System Properties

OR

Use xstm or cstm

[T G Manikandan]

Just go into SAM--->performance Monitor-->system properties

find the clock speed

ALso you could use

#echo itick_per_tick/D | adb -k /stand/vmunix /dev/kmem


Thanks
Manikandan

[kish_1]

try man getconf, am not sure will give the processor speed

[MANOJ SRIVASTAVA]

Hi

couple of ways to do it:

1. SAM---->Performance Monitors ---->System Properties---->CPU

2.echo itick_per_usec/D | adb -k /stand/vmunix /dev/kmem

Manoj Srivastava