cmquerycl takes very long

[Alex Lavrov.]

Hello,
for some reason "cmquerycl" takes a very long tim on my servers. It takes over 15 minutes.

What can be a reason?


thanx.

[KCS_1 · Accepted solution]

Hi,

Have a look at this the following:

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000070346184


some gives you to take a very long time when excuting some commands of MC/SG.



Regards

[melvyn burnard]

there could be a number of reasons, not least of which is the size of the cluster.
You could have a lot of disks out there on each node
You could have large networking traffic
You could have issues with name resolution if using DNS and not the hosts files.

One small test is to do a cmquerycl on the local node only and see how long that takes, then do it to just on eof th eremote nodes and compare.
You could also look at trying one of the options such as -k to reduce disc probing.
man cmquerycl for an explanation

[hua_1]

i config a mc a few days , and tame situabtion meeted. pls check ur heart beat line and network ? make sure ur trust host have been configured correctly, usr" rlogin" to test it

[Alex Lavrov.]

Thanx for the replies, I'll check all these things.