Cold installing 11 over 10.20

[Kevin_107]

Has any had any problems with Hardware after cold installing 11, Anything to look out for ?!?!

[Paula J Frazer-Campbell · Accepted solution]

Hi

Be careful with Fibbe cards as 11i will not support the earlier cards.

Paula

[Paula J Frazer-Campbell]

Hi

Be careful with Fibre cards as 11i will not support the earlier cards.

Paula

[Clemens van Everdingen]

Hi,

Also check if the installed HW needs special driver software.
Indeed for example the Lan cards like Paula mentioned, but another example is MUX EISA/PCI drivers etc.

Also first install the OS, and then the drivers. Do not select the drivers during the install phase.

This all is depending on the HW we are talking about. (model etc.)

C.

[T G Manikandan]

check this document before doing an update or cold install.
This document is for 9000 series

http://docs.hp.com/hpux/pdf/5971-0623.pdf

Thanks

[T G Manikandan]

I think this is what you were looking for

http://www.hp.com/workstations/products/unix/operating/hpux11/cookbook/cookbook.html