HPE Community
Operating System - HP-UX
1829853 Members
2380 Online
109993 Solutions
New Discussion

Configuration file $SGCONF/cmclconfig from local node is corrupt

 
Akram Shaik
Frequent Advisor

‎03-30-2007 04:55 AM

‎03-30-2007 04:55 AM

Configuration file $SGCONF/cmclconfig from local node is corrupt

Cluster was halted and The configuration file corrupt error was recorded in syslog file.

cmclconfd[2362]: Configuration file $SGCONF/cmclconfig from local node is corrupt.

After that neither cmruncl worked or cmviewcl worked. The cluster is now down.Is there any way of recovering the cluster.
when everyting is coming your way then you are in the wrong lane
0 Kudos
Reply
11 REPLIES 11
Court Campbell
Honored Contributor

‎03-30-2007 05:06 AM

‎03-30-2007 05:06 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

Do you have a backup of that file? Or you could try copying it from another node.
"The difference between me and you? I will read the man page." and "Respect the hat." and "You could just do a search on ITRC, you don't need to start a thread on a topic that's been answered 100 times already." Oh, and "What. no points???"
0 Kudos
Reply
A. Clay Stephenson
Acclaimed Contributor

‎03-30-2007 05:31 AM

‎03-30-2007 05:31 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

You should have your ascii version of the configuration file on at least one of the nodes. I would first run cmcheckconf on that file and then run a cmapplyconf.
If it ain't broke, I can fix that.
0 Kudos
Reply
Akram Shaik
Frequent Advisor

‎03-30-2007 05:35 AM

‎03-30-2007 05:35 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

Yes i tried putting back the old file which i backed up. and tried cmcheckconf. even that failed.. cmviewcl hangs.
when everyting is coming your way then you are in the wrong lane
0 Kudos
Reply
Akram Shaik
Frequent Advisor

‎03-30-2007 05:44 AM

‎03-30-2007 05:44 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

cmcheckconf returns error

Warning: Unable to get configuration for cluster prodcl.
Error: Node NODEA is refusing Serviceguard communication.
Please make sure that the proper security access is configured on node
NODEA through either file-based access (pre-A.11.16 version) or role-based
access (version A.11.16 or higher) and/or that the host name lookup
on node NODEA resolves the IP address correctly.
cmcheckconf : Failed to gather configuration information



when everyting is coming your way then you are in the wrong lane
0 Kudos
Reply
Court Campbell
Honored Contributor

‎03-30-2007 05:48 AM

‎03-30-2007 05:48 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

do you have a cmnodelist file under /etc/cmcluster on NodeA?
"The difference between me and you? I will read the man page." and "Respect the hat." and "You could just do a search on ITRC, you don't need to start a thread on a topic that's been answered 100 times already." Oh, and "What. no points???"
0 Kudos
Reply
A. Clay Stephenson
Acclaimed Contributor

‎03-30-2007 05:48 AM

‎03-30-2007 05:48 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

By any chance have you disabled the identd service on any (or all) of your nodes?
If it ain't broke, I can fix that.
0 Kudos
Reply
Court Campbell
Honored Contributor

‎03-30-2007 05:50 AM

‎03-30-2007 05:50 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

as per the error do you have nodea defined in the /etc/hosts file on the node you are running the commands from? and is the ip correct?
"The difference between me and you? I will read the man page." and "Respect the hat." and "You could just do a search on ITRC, you don't need to start a thread on a topic that's been answered 100 times already." Oh, and "What. no points???"
0 Kudos
Reply
Akram Shaik
Frequent Advisor

‎03-30-2007 05:52 AM

‎03-30-2007 05:52 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

Dear,

NOTE: This is a stand alone cluster. No Fail over has been configured yet. Iam trying to run this cluster on the NODEA alone.

cmnodelist is not present here.

I want to bring this cluster up in this node first.
when everyting is coming your way then you are in the wrong lane
0 Kudos
Reply
Court Campbell
Honored Contributor

‎03-30-2007 05:53 AM

‎03-30-2007 05:53 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

Also, i see it says pre-a.11.16. What version are you running. If I remeber correctly a.11.15 had some weird issue that required a patch. it had to do with identd as mentioned above by Clay.
"The difference between me and you? I will read the man page." and "Respect the hat." and "You could just do a search on ITRC, you don't need to start a thread on a topic that's been answered 100 times already." Oh, and "What. no points???"
0 Kudos
Reply
Akram Shaik
Frequent Advisor

‎03-30-2007 06:05 AM

‎03-30-2007 06:05 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

The cluster was working fine until i changed my Secondary cluster lock device. after that everything was gone. i applied the config and it returned errors same as i posted earlier(errors for cmcheckconf)
when everyting is coming your way then you are in the wrong lane
0 Kudos
Reply
Court Campbell
Honored Contributor

‎03-30-2007 06:16 AM

‎03-30-2007 06:16 AM

Re: Configuration file $SGCONF/cmclconfig from local node is corrupt

any particular reason you specified a secondary lock vg and pv? it's usually not necessary.
"The difference between me and you? I will read the man page." and "Respect the hat." and "You could just do a search on ITRC, you don't need to start a thread on a topic that's been answered 100 times already." Oh, and "What. no points???"
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.