Configuration old DTC in new server with HP-UX

[Roxana_4]

My names Roxana and I am from Romania.
I have some old DTC’s (HP 2345A DTC with 48 ports and HP 2340A DTC with 16 ports) which I use to connect some HP terminals to a HP e3000 server with MPE/iX 7.0.
My question is: is there any compatibility between these DTC’s (HP 2345A and HP 2340A) and the Integrity rx2600 server with HP-UX 11iv2; could they be configurated in HP-UX 11iv2 in order to keep them function ?
Please tel me know where I could find documentations about DTC’s configuration in HP-UX 11i
Thank you and best re

[Andrew Rutter · Accepted solution]

hi roxana and welcome,

Yes you can configure the dts's on hpux and heres alink to all the manuals

http://www.docs.hp.com/en/netcom.html#DTC

You use dtcmanager/ux software to configure as required generally. You may need an optinal interface in the rx though to connect them.

Andy