Operating System - HP-UX
1830898 Members
2212 Online
110017 Solutions
New Discussion

Configuring dial-in modem on HP-UX

 
Robert Early
New Member

Configuring dial-in modem on HP-UX

Hi,
I'm in the process of setting up a modem for dial in access on serial 2. I got as far as being able to connect from a remote computer. The login message is garbled however:
CONNECT 9600 V42bis
B????????

I tried changing the bit/parity settings on the client but to no avail. Anyone have any ideas?
9 REPLIES 9
Printaporn_1
Esteemed Contributor

Re: Configuring dial-in modem on HP-UX

Hi,

Login prompt come from getty process , that you can configure in sam -> peripheral device
-> terminal and modem

add modem check at receive incoming call.

it will create an entry from getty
in /etc/inittab for you.

enjoy any little thing in my life
Robert Early
New Member

Re: Configuring dial-in modem on HP-UX

It is already configured for incoming calls. It is answering the call ok. The login message as defined in gettydefs is scrambled as in the above example however. I set the speed in sam as the 19200 and modem speeds already defined in gettydefs but it seems to make no difference.
Alexander M. Ermes
Honored Contributor

Re: Configuring dial-in modem on HP-UX

Hi there.
FOr the setup of modems there is a lot of documentation.
Just look at these :
CSCI00000232 How to config. multitech modems
PU94040614442 Configuring non-hp modems
CSCI00000042 Requirements for modems to work on HP-UX
If you need more, search in the Technical Knowledge database with search string modem.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"
Robert Early
New Member

Re: Configuring dial-in modem on HP-UX

I'm new to the ITRC - what kind of documents are these and how do I access them?

Thanks..
Printaporn_1
Esteemed Contributor

Re: Configuring dial-in modem on HP-UX

HI,

Please try lower speed in sam to 9600.
enjoy any little thing in my life
Robert Early_1
New Member

Re: Configuring dial-in modem on HP-UX

I lowered it to 9600 and it still doesn't work.
Printaporn_1
Esteemed Contributor

Re: Configuring dial-in modem on HP-UX

Hi,

What modem you're using ?
US Robotic try at&f&h1&b1&w
enjoy any little thing in my life