Configuring Lan Console

[Alex_17]

Hi,

I've configured some Lan Console without any problem but now I'm trying to configure (N-server) and when I type Ctrl+b from the console I can't get the Gsp prompt.

Any idea??

Thanks in advance,

Alex.

[Vincent Farrugia]

Hello,

Let's check the obvious. Check whether the "Remode Mode" is on. Sometimes it's just as simple as that.

Remote Mode (F4 key) should have an asterisk (*) against it. If not, press F4 and it will appear.

HTH,
Vince

[Sanjay_6]

Hi Alex,

Take a look at the thread below,

http://docs.hp.com/cgi-bin/otsearch/getfile?id=/hpux/onlinedocs/hw/class_n/n4000/content/00/08/0E/idd/28.html&searchterms=Lan%7cConsole%7cN%7cclass&queryid=20011108-075736

Hope this helps.

Regds

[Alex_17]

Hi Vincent,

yes, the "remote Control" is ON.

The Lan Console seems to be configured, but when I telnet to it I get the message "maxiumum number of active telnet session reached". Now I'm trying to reconfigure, but I can't do it.

Thanks.

[Alex_17]

Hi Sanjay,

I've already read that paper. Thanks for your help.

Alex.