HPE Community
Operating System - HP-UX
1834813 Members
2790 Online
110070 Solutions
New Discussion

Re: Configuring same ip-address to different NIC cards

 
SOLVED
Go to solution
M.Thomas
Frequent Advisor

‎07-03-2007 03:41 AM

‎07-03-2007 03:41 AM

Configuring same ip-address to different NIC cards

Hi Admins,
Please tell me how to configure same ipaddress to two NIC cards for high availability in cluster environment

Thanks in advance

Regards
Thomas

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎07-03-2007 03:44 AM

‎07-03-2007 03:44 AM

Solution

Re: Configuring same ip-address to different NIC cards

To use the same IP address on many NICs you probably need APA:

http://www.hp.com/products1/serverconnectivity/adapters/apa_overview.html?jumpid=reg_R1002_USEN

HP auto-port aggregation

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.