Connect to internet

[Hiroyuki_1]

Hello . I'm new SOHO user to hp-ux . Recently our ISP started connecting at more than 20 Mbps to internet . I'd like to connect faster but my hp-ux 11.22 and giga bit ehter NIC connects around 3Mbps . It's easier to adjust tcp parameters on windows machine . On hp-ux , adjusting MTU value with route command isn't effective to connecting speed . RC engineer said that current hp-ux LAN driver adjusts its parameters itself and user must do nothing . I'm confusing . Any suggestion ? Thank you .

[Radhakrishnan Venkatara · Accepted solution]

hi,

u can find the information in the following link
http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/J5683-90002/J5683-90002_top.html&con=/hpux/onlinedocs/J5683-90002/00/00/7-con.html&toc=/hpux/onlinedocs/J5683-90002/00/00/7-toc.html&searchterms=gigabit&queryid=20030523-031437

radhakrishnan

[Hiroyuki_1]

Thank you very much Radhakrishnan . It was so useful . I tried to adjust some values but it began unstable and slower . Still I can't find suitable values . How everybody looks for right values ?
Best regards,