connection to x windows in hp unix v3.1

[James_Lau]

hi all , can any one help me how to connection to x windows in hp unix v3.1 , i am using refletion x form windows , it work will with 11.11 and 11.23, thanks.

[Dennis Handly]

If using refletion x, you should just be able to export DISPLAY and then use it:
export DISPLAY=windows-IP:0.0

You'll need to get the IP address of your PC.

Or are you saying that for 11.31 you're having problems? You will have to install CDE from your installation disks. It no longer does it by default.

[James_Lau]

i am using hp unix v31 , i also have install the "swlist -l product |grep -i cde
CDE B.11.31 HP-UX CDE User Interface " , but the reflection-X still cannot work , amy one pleae help, thanks.

Regards
James Lau

[Dennis Handly]

Also see this thread about starting CDE:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1213283

[Avinash20]

Please refer to the following link

https://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1180223

[James_Lau]

hi all , but in hp unix v31 , the /usr/dt/lib/dtlogion did not show here , is it the 11.31 is not the same as 11.11 ans 11.23 , and i am sure the i did instalkl the CDE , and how to check is this CDE x-connection is it started up ? please advice , thanks.

Regards
james Lau