corrupted AutoPath

[Paul_481]

Hi,

When I run, swlist -v Autopath, the STATE is CORRUPTED. Is there a way to rebuild this?

Regards,

Paul

[Paul_481]

running on HPUX 11.00

[lawrenzo_1]

what is autopath? is this the name of the software bundle?

[lawrenzo_1 · Accepted solution]

ok I have had a look at autopath and it is addition software to install,

have done an swverify?

Do you know when the last time the software was used?

Have you got backup?

[Paul_481]

Hi,

Here's the result of swverify



* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swverify.last".
ERROR: "Oracle:/": 1 software selection(s) are corrupt.
ERROR: "Oracle:/": The software dependencies for 1 products or
filesets cannot be resolved.
ERROR: "Oracle:/": 8 files had errors during this operation.
* The analysis phase failed for "Oracle:/".
* Verification had errors.

What backup I need to restore it from? /opt?

regards,

paul

[lawrenzo_1]

have you tried recycling the software
and then
have you tried the application?

I would try reinstalling the software

are there any logfiles related to autopath that may point to the problem?

[Paul_481]

* Beginning Analysis Phase.
* Target: Oracle:/
* Target logfile: Oracle:/var/adm/sw/swagent.log
* Reading source for file information.
ERROR: Corrupt AutoPath.autopathfiles,l=/,r=2.00.00
The prerequisite "ULM-SERVICE" for fileset
"AutoPath.autopathfiles,l=/,r=2.00.00" cannot be successfully
resolved.
ERROR: The dependencies for fileset
"AutoPath.autopathfiles,l=/,r=2.00.00" cannot be resolved (see
previous lines).
ERROR: File "/opt/Autopath/autopath.pdf" should have size "302013"
bytes but the actual size is "0" bytes.
ERROR: File "/opt/Autopath/changes.log" missing.
ERROR: File "/opt/Autopath/readme.txt" missing.
ERROR: File "/sbin/autopath" missing.
ERROR: File "/sbin/init.d/autopathinit" missing.
ERROR: File "/usr/conf/lib/libhpap.a" missing.
ERROR: File "/usr/conf/master.d/hpap" missing.
ERROR: File "/usr/share/man/man1/autopath.1m" missing.
ERROR: Fileset "AutoPath.autopathfiles,l=/,r=2.00.00" had file
errors.

* Summary of Analysis Phase:
ERROR: Verify failed AutoPath.autopathfiles,l=/,r=2.00.00
ERROR: 1 of 1 filesets had Errors.
ERROR: The Analysis Phase had errors. See the above output for
details.


What do you think is much better? restore the missing files or reinstall.

[lawrenzo_1]

looks like files have been deleted, run a backup that will replace the missing files.

I'm not sure what kind of logs/info/cfg files are stored by autopath so not sur eof the impact on reinstalling.

The backup should be good

[Paul_481]

ok thanks