Cron - Audit ID

[Shannon_1]

I am trying to run a cron job and it is telling me "Your job did not contain a valid audit ID". I'm confused because I thought this was related to a trusted system and I am not in that mode. What kinds of things should I check here?

[Steven E. Protter]

Ah!

You have recenly converted your system to trusted mode!

It is related.

Here ia a thread with the fix.
http://www1.itrc.hp.com/service/james/dispDoc.do?docURL=http%3A%2F%2Fsearch.hp.com%2Fredirect.html%3Furl%3Dhttp%253A%2F%2Fforums1.itrc.hp.com%2Fservice%2Fforums%2Fquestionanswer.do%253FthreadId%253D139389%26qt%3D%2BYour%2Bjob%2Bdid%2Bnot%2Bcontain%2Ba%2Bvalid%2Baudit%2BID%26hit%3D1&aid=SEARCH_FORUMS&pil=1&serStr=Your+job+did+not+contain+a+valid+audit+ID&pir=1

http://www1.itrc.hp.com/service/james/dispDoc.do?docURL=http%3A%2F%2Fsearch.hp.com%2Fredirect.html%3Furl%3Dhttp%253A%2F%2Fforums1.itrc.hp.com%2Fservice%2Fforums%2Fquestionanswer.do%253FthreadId%253D67705%26qt%3D%2BYour%2Bjob%2Bdid%2Bnot%2Bcontain%2Ba%2Bvalid%2Baudit%2BID%26hit%3D3&aid=SEARCH_FORUMS&pil=3&serStr=Your+job+did+not+contain+a+valid+audit+ID&pir=3

http://www1.itrc.hp.com/service/james/dispDoc.do?docURL=http%3A%2F%2Fsearch.hp.com%2Fredirect.html%3Furl%3Dhttp%253A%2F%2Fforums1.itrc.hp.com%2Fservice%2Fforums%2Fquestionanswer.do%253FthreadId%253D650638%26qt%3D%2BYour%2Bjob%2Bdid%2Bnot%2Bcontain%2Ba%2Bvalid%2Baudit%2BID%26hit%3D4&aid=SEARCH_FORUMS&pil=4&serStr=Your+job+did+not+contain+a+valid+audit+ID&pir=4

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=5306

http://www1.itrc.hp.com/service/james/dispDoc.do?docURL=http%3A%2F%2Fsearch.hp.com%2Fredirect.html%3Furl%3Dhttp%253A%2F%2Fforums1.itrc.hp.com%2Fservice%2Fforums%2Fquestionanswer.do%253FthreadId%253D216029%26qt%3D%2BYour%2Bjob%2Bdid%2Bnot%2Bcontain%2Ba%2Bvalid%2Baudit%2BID%26hit%3D10&aid=SEARCH_FORUMS&pil=10&serStr=Your+job+did+not+contain+a+valid+audit+ID&pir=10

This last one is my thread. There is a link to the audit id fix in there.

The solutions follow the same general path, but I decided I woould rather give too much versus too little information.

SEP

[Devesh Pant_1]

Shanon,
You say you are not in a trusted mode. Are you sure
Please check using the following command
/usr/lbin/getprpw

If you accidentally went to trusted mode and want to unconvert, even that is very simple/

thanks
Devesh